So heres the story. I bought an exedy OEM cluth replacement kit a month or so ago and sunday, i finally found time to replace it. Ive done a few clutches in my day and everything went as expected. Until i tried to drive it.
When i start the car with the clutch pedel to the floor everythings fine. When i let the clutch out, the car bogs down and dies. I jacked the ass end up and it does the same thing. Even in Neutral. Seems almost as if the clutch was stuck to the flywheel or pressure plate and its not releasing from the engine. Ive made sure the quadrant was pulled all the way up and the cable was tight. I cant seem to figure this one out. Lol
hoping someone has had this same issue and can give me some pointers. Its a 1997 gt with the T45 transmission. Any info would be greatly appreciated. Thanks
When i start the car with the clutch pedel to the floor everythings fine. When i let the clutch out, the car bogs down and dies. I jacked the ass end up and it does the same thing. Even in Neutral. Seems almost as if the clutch was stuck to the flywheel or pressure plate and its not releasing from the engine. Ive made sure the quadrant was pulled all the way up and the cable was tight. I cant seem to figure this one out. Lol
hoping someone has had this same issue and can give me some pointers. Its a 1997 gt with the T45 transmission. Any info would be greatly appreciated. Thanks