Build Thread My Never Ending 89 Notch Thread

  • Sponsors (?)


ImageUploadedByTapatalk1431230674.417936.jpg
ImageUploadedByTapatalk1431230685.304876.jpg



Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
 
  • Like
Reactions: 1 users
Well Nick nails it again . Spoke to him before he said he seen this once and believes it was when Kris first did the after market block in his car . Told me to put some weight on the rear wheels to simulate ride height . Sure enough this f u ker picked up over an inch of play now before it bottoms out . And I don't have the full weight on the floor just my jack holding the weight of the pumpkin . Will get better as the car is on the ground so I think I am golden !
ImageUploadedByTapatalk1431099751.175693.jpg



Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
That looks like 1/4" to me....or is there a different pic with more umm,...."exposed shaft"?
 
That looks like 1/4" to me....or is there a different pic with more umm,...."exposed shaft"?
That's how much exposed shaft you end up with again not full weight on it . That's just the jack on the pumpkin off the jack-stands . There is a full inch or more of room before it were to bottom out at this point . At ride height I don't see it being a issue . Considering like Nick said the only time the axle will hang that much is in this situation . What do you think ?


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
 
That's how much exposed shaft you end up with again not full weight on it . That's just the jack on the pumpkin off the jack-stands . There is a full inch or more of room before it were to bottom out at this point . At ride height I don't see it being a issue . Considering like Nick said the only time the axle will hang that much is in this situation . What do you think ?


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

It'll be ok if you do indeed get an extra 3/4 from what I'm seeing if your rear end is not at ride height. I just assumed that that was the pic of the thing when it was all said and done
 
It'll be ok if you do indeed get an extra 3/4 from what I'm seeing if your rear end is not at ride height. I just assumed that that was the pic of the thing when it was all said and done
No that's only the pumpkin jacked up just off the rear jack stands . Once it's on the ground I'll recheck . If not I have someone who will shorten and re balance already lined up for 150


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
 
  • Like
Reactions: 1 user
ImageUploadedByTapatalk1431808773.834346.jpg


New glenns smooth black cover on the way


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
 
  • Like
Reactions: 1 user
ImageUploadedByTapatalk1431810796.516374.jpg
everything is done except 2 fittings - one aeromotive sent wasn't threaded all on the end lol . Other wise it's all there minus the wiring that has to be done


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
 
  • Like
Reactions: 3 users
Been working like a dog . Not much to report besides waiting on fittings that were delivered yesterday and stolen 2 min later off my steps


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
 
Been working like a dog . Not much to report besides waiting on fittings that were delivered yesterday and stolen 2 min later off my steps


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
That is such bs man... What fittings were you waiting on? I would kill someone that walked up to my porch to steal from me...
 
  • Like
Reactions: 1 user
Fittings are found kid was locked up He robbed a sergeants car his vest and helmet so they had a search warrant for his house and that's how they got it


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
 
  • Like
Reactions: 5 users