Separate names with a comma.
Make sure the mating surfaces are clean, dry,smooth and straight. Gaskets go on dry...
They should be able to press those out easily and reinstall them on the right side. Make sure they grease them up again and you are good to go.
Not true in all cases. It depends on what transmission you have and what tire size. I used a black one as I have an AOD with an 8 tooth tail housing...
I would buy it only as a weekend toy, show car. You can get Cobra's all day long for 6-10k . For $22k you can get a cherry terminator or even a...
check the switch with a test light to see if you have power when you depress the button. Often those buttons go bad after years of use. 5 minute...
impact wrench would have had that off in a minute. Could have gone down to a machine shop and paid them $5 to slap it on for you. Thanks for the...
I think we need to revise this thread to "Want to blow 4 years and $50k on a foxbody......."
So much Fram fail
Orange can o' death there. I wouldn't run one of those on my ex wife's car. Cut one of those suckers open and compare it to a Wix or FL1A. No...
Mike, why not call the company and ask?
@jrichker- I think he may have solved his problem - his post is over a year old..lol
Unless you want practice changing cams, I don't think the 5-10hp potential is worth it.
ALL HAIL THE B CAM!
Honestly? Sell the 80 hatch, buy a 87 and newer- even a roller. The brakes, cooling, suspension, rear end, and about everything else are all better....
unless you run a big cam or put a blower on it, no need to convert to Mass Air.
If you zoom in real close on the driver side pic, it looks like an alum head. Can't make out what brand though.
The only way I am paying $300 for a battery is if Kate Upton installs it- naked- covered in chocolate- and gives me a spatula- and a feather.
I think he done squirreled away