Separate names with a comma.
finally got another car (super cheap) almost 8 years to the day that I got my first lx (hatch, was stolen about four months after I got it)
my quicktimes rubbed, so I took a mini-sledge to the inner fender.
I dunno, maybe try replacing the pcv valve and screen..may not help anything, but it sure shouldn't hurt anything.
I thought you meant you had yours gapped at .015 haha..I'd run atleast .054. with more spark, more fuel and air can be combusted, thus making each...
I shifted at around 6 or so (on the autometer) but the b-cam allowed the car to make power higher up, so that's the reason for that. it's all...
well duh..that's the same as saying a stock headed/intake 5.0 will not cover the 1/4 mile as fast as one with aftermaket heads/intake lol :D...
nah, that was on the autometer. I had my light set for 6200 and she pulled right up to it
my car pulled to over 6 w/the b-cam
342=347 minus the .030 over?
use one of these deals..
should be slotted on one end and philips on the other..or you could use a penny or dime(I've heard more about...
what kind of head is on it? you could probably use a universal joint
what kind of plug is it that you used? screw type or an actual plug..like a cork or something of that nature
it'll sound crappy and air will blow out. maybe you have the wrong size plug. did you try tightening the plugs down more?
yeah, I spun out with my skinnies up front..not cool.
thanks for the ideas. more are welcome.
alright, we'll try that the next time we work on it.
245/50 rubbed on my front upper control arms when I had the ponies on, but those are a 16in wheel, so it's probably different.
check my edit..is it a reverse thread?
motor turns over too easily for the breaker bar method..I guess we could try the flywheel bolts one..we tried holding one of the bolts while the...
flywheel's off, too. all that's on there are the pistons/rods, crank, timing chain cover, balancer, and crank pulley. think we'll be able to get it...