Search results

  1. plum819

    Stinky Stang

    Ever since I purchased My 89 Notch 2 years ago it has had a rich smelling exhast smell. Had no cats when I bought it. Last year I redid the engine bay so of course I ripped out all the smog to make it look pretty. I also got rid of the EGR. While the engine was out I did gt40 heads and...
  2. plum819

    SCT 3 bank chip

    Was wondering if anyone was running the SCT 3 bank chip? I think thats what they call it. American muscle sells it for $270 with 3 tunes. All the ratings on their site seem to be good. I have heard mixed reactions about Bama Tuning. Just wanted to get some feedback from members that are running it.
  3. plum819

    Lowering my 07 Gt500

    Doesnt seem like a whole lot of action on the Gt500 forum so I figured I would post here. I dont Like the jacked up look of my 07 Gt500 so I want to lower the rear. Ive heard of people doing only the rear. This question is really for anyone who has lowered there car. I read a thread (not on this...
  4. plum819

    Power Rack on UPR K Member Clerance Issues

    Just went to put on my reman power steering rack on my new UPR K member.Realized the rack is rubbing up against the the motor mount portion of the K member on the passengers side. it wont allow the rack to fully seat on that side. Its on the peg but it is pushed out an 1/8 to a 1/4 inch more...
  5. plum819

    Oil Pump Priming

    I installed a new oem oil pump and buttoned up the pan and then read that you need to prime the pump before installing. Just wondering if it will pull it with a drill primer with no oil in the pump or do I need to pull the pan off and fill the pump with oil?
  6. plum819

    GT40 valve job

    I got a set of GT40 cast iron heads for $200 that Im doing some mild porting on. I bought the Trick Flow spring kit for another $150. I found some one to cut new seats for $100.00.Is it worth the money or should I lapp them in and leave it at that. Im putting these on a 140k bottom end so some...
  7. plum819

    Advancing B303 cam

    Hey I know alot of people think its junk, but ive got a B303 CAM Im installing on a stock block with cast iron gt40s and an explorer intake.I talked to Mike at Thumper and he suggested I advance it 4 degrees. Im also putting the Crane 1.7 RR's as well. I didnt mention that to him. Just wondering...
  8. plum819

    Oil pump gasket?

    Finally got that windage tray in.Got a quick question on the oil pump.When I removed the old pump I did not see a gasket between the pump and block. I have a gasket for the pickup side. I have a Haynes manual and all it talks about is the pickup gasket. Is there a gasket for the block side? Just...
  9. plum819

    Windage tray, MAC or MPG

    Hey my first post on here. I found an old thread on here about people having problems with the MAC windage tray fitting and was wondering if anybody has had any recent experiences. Im puting a stock style pan back on and I think the MAC and the MPG will fit under the stock pan. The MPG runs $100...