Search results

Hi guys, I did a disk brake conversion on my 68 mustang, and added a booster. I bought the whole set up from a reputable dealer. Ive been having issues, as the brake pedal feels weird. It kind of feels firm then goes down fast. My question is, i didnt change the proportioning block. It is...

Hi guys, im removing a 351 with a fmx automatic transmssion, the motor is seized and cant turn the flexplate. Any ideas on removing the motor, should i seperate it and just let the torque converter leak out he fluid? Should i try to remove motor and tranmission together? Any ideas i dont want to...

Hi guys, I have a 68 that has a new booster and mc. Booster is ssbc and master cylinder is disc/drum . Went driving around after changing out my motor and now the pedal goes down really easy and stays down when I brake. It slowly comes back up. The adjustable pushrod is correctly adjusted...

I have a stock 91 302 efi i have put in my 68 mustang, i need help on wiring the alternator. its a stock alternatorwith internal voltage regulator and I'm not needing to upgrade since I'm not running much load. Anybody have any tips on wiring the alt. is the external voltage regulator necessary...

I have a stock 91 302 efi i have put in my 68 mustang, i need help on wiring the alternator. its a stock alternator with internal voltage regulator and I'm not needing to upgrade since I'm not running much load. Anybody have any tips on wiring the alt. is the external voltage regulator...

Hi guys, I dropped a 302 efi from a 91 in my 68 mustang, put a tanks fuel tank with intank fuel pump. Fuel pressures holds steady at 40psi. When i drive the car it bucks and feels like it has no power. The car also idles rough and fluctuates. Ive checked the firing order and its right. Please...

Hi guys, I dropped a 302 efi from a 91 in my 68 mustang, put a tanks fuel tank with intank fuel pump. Fuel pressures holds steady at 40psi. When i drive the car it bucks and feels like it has no power. The car also idles rough and fluctuates. Ive checked the firing order and its right. Please...

Hi guys, just installed and rebuilt a foxbody 302 efi from a 1990 mustang and dropped it in a 68 mustang. I left the motor stock except for for an e303 cam. I added a new stock flywheel and clutch. I had the t5 and had been using it before. I started up the car and noticed vibration in or on the...

Hi guys, just installed and rebuilt a foxbody 302 efi from a 1990 mustang and dropped it in a 68 mustang. I left the motor stock except for for an e303 cam. I added a new stock flywheel and clutch. I had the t5 and had been using it before. I started up the car and noticed vibration in or on the...

I have a 68 mustang that has been sitting for 2 month, I replaced the wiper control arms and now is making a grinding noise. Arms seem to move freely and it is a new motor. Wiper motor doesnt park either. Any suggestions? Thanks

Just tuned my 302 efi and was hoping for ideas for battery relocation. Anybody relocate battery to driver side? Any other ideas ? Any pics?

I got the wiring done in my 68 fastback thanks to you guys on stangnet, and now im working on a fuel system that isnt 500$. I have looked at a few websites online, but will like help. Any pics would be appriciated and inventory of parts used. I have a stock except for a e303 cam,1991 mustang...

I am currently doing an EFI swap in my 1968 mustang Fastback. Have an entire 1991 mustang gt 5.0. Is there any company, in which you can send them the 1991 mustang harness and can modify to fit on the 68 mustang. Thanks

I am trying to remove main harness, but gets caught up on heater box. How do I remove heater box to remove harness. Thanks

I am doing an overhaul on a 91 stock mustang and have a question about part number m-6500-r302 . The old lifters that came out of the car don't sink - the pushrod seat is fixed or doesn't move. The new lifters, if i get a pushrod, i can push the pushrod seat down about 1/4 inch. Please help ...

I noticed valve covers range 1964-1985 and 1986-1995 for a 302. Installing a 1991 302 efi in my 68 fastback and want to know what difference are? Clearance for intake? Guy is selling some cool valve covers, but they are 1964-85. Please any info will help

I'm doing a brake swap on my 68 and just removed the spindles to clean and paint them. I have replaced the upper control and ball joint in the recent past, but not the lower control , there is nothing wrong with them as I can see or hear. Should I replace them or just clean them up. The control...

Drove my 68 around for a few minutes and lights seem to turn off and came back on. Then they steadily flickered all the way home. I changed the headlight switch a year ago. I have original wiring and don't have halogen bulbs. Disconnected my electric fan and headlights still flickered. Any ideas?

I am interested in buying a conversion kit, but it states for a 68 v8 spindles. Are there an difference in v8 spindles to a 6 banger. And this is the setup does anybody have any info. Conversion is 450$ and free shipping. Has anyone heard of performance online?

Installed a Spal electric fan on my 68 mustang and a relay from autozone.I ran fan direct to make sure its not the fan and it woks fine. The fan seems to turn real slow as if it needs more amps? Installed a 75 amp external reglated alternatr and the voltage regulator is getting hot. I followed...