Search results

  1. 5-SpeedStallion

    Performance/Street Cams

    Actually, CompCams makes off-the-shelf cams for 3.8's... but I'd recommend going with a custom-spec cam from someone like SuperSix Motorsports (who will have it made by CompCams). BTW, there are quite a few people with street-driven cammed 3.8's. For instance, me. :)
  2. 5-SpeedStallion

    Veterans check in (5 years +)

    I've been around a while... I recognize your name, for sure. Welcome back.
  3. 5-SpeedStallion

    scoops

    It has nothing to do with whether or not the car has ABS. It's purely a function of what year the car is. 94's and, I believe, 95's, have the vented rear scoops, and the rest do not.
  4. 5-SpeedStallion

    2003 Mustang 3.8l fuel cut-off switch.

    With regard to the fuel pump shut-off switch, it is just a button in the trunk on, I believe, the left side. There should be an opening cut in the vertical trunk lining that allows you to stick your finger in and poke the button. Good luck
  5. 5-SpeedStallion

    A few ?'s

    For the brakes, buyfordracing.com sells Cobra brake kits for as little as $350 with the calipers, rotors, lines, etc... As for making 250hp N/A, like red said, you're going to want to talk to someone like Super Six Motorsports or Delk Performance. 250hp (assuming you mean crank, since you...
  6. 5-SpeedStallion

    Prank badges

    http://www.autobadges.com/emblems/
  7. 5-SpeedStallion

    For those of you running Maximum Motorsports COIL OVERS...

    I don't either, but .25" wouldn't worry me TOO much.
  8. 5-SpeedStallion

    For those of you running Maximum Motorsports COIL OVERS...

    Good to know... I'll be running 10th Anniversary Cobras w/ 275's, 96+ spindles, and MM C/O's soon. You could always use a .25" wheel spacer if it rubs
  9. 5-SpeedStallion

    The New Guy

    Welcome... I recognize you from 3.8 and MF...
  10. 5-SpeedStallion

    Is the factory intake tract all that ineffective

    Whatever you do, it's not going to yeild a huge gain, whether it's a CAI or a K&N. The gain to be had from removing the silencer and adding a K&N filter is going to depend on who you talk to. Some people say it's worth ZERO hp, some say it's worth 2-3hp. Similarly, some people say that a...
  11. 5-SpeedStallion

    Anyone here?

    :rlaugh: I was thinking the same thing...
  12. 5-SpeedStallion

    V6 Choppy Cam?

    Here's one: http://www.youtube.com/watch?v=IG0_d-wswyM Cam specs are in the video...
  13. 5-SpeedStallion

    Anyone here?

    I remember you... Just like I did when you mistakenly posted on mustangforums.com instead of here :D
  14. 5-SpeedStallion

    My most recent project:

    :: drool :: I'm planning full MM stuff for my Notchback in the future, too.
  15. 5-SpeedStallion

    Bullitt Springs

    V6's can benefit from higher spring rates, just like any Mustang can. However, the stock spring rate on a V6 is significantly lower than the 600lb/in (front) Bullitt springs, so the stock dampers won't offer sufficient damping to take advantage of the higher spring rate. Then again, the same...
  16. 5-SpeedStallion

    2007 Woodwar Dream Cruise

    I'm coming up from Tampa, FL, for the 4th year in a row. :nice:
  17. 5-SpeedStallion

    Show off your less than perfect 5.0!

    Yeah, it made sense for me because I the combination of the bald-ish tires and the stock brakes was becoming totally unsafe, so rather than redo the stock brakes and put new tires on the front, I figured I should just throw on the stuff I already had.
  18. 5-SpeedStallion

    Show off your less than perfect 5.0!

    Thanks... and yeah, the back will be going in shortly along with some other stuff: 8.8 Rear End SN95 Axles Trick Flow Differential Cover Cobra Rear Calipers Brembo Rear Rotors (11.65") '03 Cobra Springs (Front) '04 Cobra Bilstein Struts Bullitt Springs (Rear) Bilstein HD Shocks...
  19. 5-SpeedStallion

    Show off your less than perfect 5.0!

    Peeling clear coat and HALF of a 5-lug swap :D Oh, and it's not a 5.0, either :(