Search results

  1. TrophyHead

    Brodix heads for my build?

    Looking to purchase a set of heads for my kb build which is going to be a dart block 363 with a intercooled Kenne Bell Flowzilla and a TMoss ported explorer lower. Just like one of our members did years ago. I'm limited to a 1262 size intake gasket because of the explorer lower intake I'm...
  2. TrophyHead

    Sanden A/C Compressor brackets?

    Hi guys. Does anybody know if the brackets for a sanden air compressor in one of our foxbody A/C kit are metal or plastic? Reason I ask is I plan on putting my A/C back together and getting a supercharger and I do not want plastic brackets on my engine.
  3. TrophyHead

    94-95 stock alternator pulley size?

    Hi guys, Anybody know what the stock alternator pulley size for a 94-95 was? Having a hard time locating this information I plan on using a 6.5" crank pulley and wanted to make sure I have the correct pulley for my 3G alternator. Thanks
  4. TrophyHead

    Coolant Expansion Tank...

    Should these tanks be completely sealed or opened to atmosphere? If sealed how does the escaped pressure return when the radiator cap re-seats? I'm not thinking clearly and need this answered.
  5. TrophyHead

    Can A Lower Intake Gasket Cause Coolant Loss?

    I'm loosing coolant in my car. No coolant in oil and no bubbles being seen in radiator while idling. I add coolant and and it will come out of exhaust for about 10 minutes than stop. Open up radiator and the I see a loss of coolant below the water pump. I'm thinking the lower intake gasket...
  6. TrophyHead

    Scratches In Glass How To Remove

    Can I remove scratches in glass? On my sunroof there is a few really light scratches I would like and try to remove. Any products out there I can us to make it look better?
  7. TrophyHead

    Power Seat Female Connector...help

    I'm looking for the connector that comes out of the carpet and plugs into the front driver seat plug to make the power adjustably work. Seats I'm using came out of a 03. Does anybody know what the motorcraft part number for this electrical connector? I believe these are for 99-04 front...
  8. TrophyHead

    Who Sells Oem Sensors...

    Looking for a motorcraft ACT and ECT sensors. Who sells NOS motorcraft sensors for our engine? I have a feeling my aftermarket ACT is giving me issues with my rich high idle condition. I dont feel like trying another aftermarket one.....Thanks guys!
  9. TrophyHead

    Does Your Rear Seat Run The Belts Through Them?

    Searched can not find any info. Anyways have 03 cobra seats and want to take my fox rear seats to get the cobra skins on them like some of you guys have done. My seats do not have receptacles in them like these cobras do with the seat belts running through them. But I'm pretty sure some fox...
  10. TrophyHead

    Fog Light Relay???

    Having a issue with my fog lights not working. I have voltage in and out of fog light switch. No voltage to fog light connector. Everything else is working on my headlight harness.(high beams, blinkers, marker,parking, ect) After looking at the veryuseful dot com wire diagrams it appears...
  11. TrophyHead

    Fuel Gauge Replacement...stock

    Hi guys! My gas gauge hasn't worked for a while now. Turns out its the gauge itself. Anyways I replace the guage with a spare fuel gauge from a 91 dash I used for my 140 mph conversion on my 88. Replaced gauge placed a 85 ohm resistor on the body side sending unit connector. Installed...
  12. TrophyHead

    Stock fuel rails and remote fuel pressure regulator

    how do you mount a remote fuel pressure regulator with stock fuel rails? I need a new pressure regulator. Would like to get a external then piece together a Glenns sleeper kit later on in summer. What are my options. Do I need different rails to mount a external / remote FPR? Thanks...
  13. TrophyHead

    My progress thread with PICS

    Got some pictures uploaded today thought I would share. It came out alot better than it used to look like. I have to get adaptar for cell phone to add before pics of engine bay. You can see where I added fiberglass in this pic. Thats where my floorboard was ripped. I...
  14. TrophyHead

    Most boost on a stock engine?

    What is the most amout of boost I can run on a stock engine safely on street with out breaking my block? I was thinking about Thumper E7's, TMOSS GT40 lower, 1.7 roller rockers, stock cam, Kenne Bell flowzilla at 10 psi. Then I was thinking why not just a KB at 16 psi with a safe tune...
  15. TrophyHead

    Aluminum Hood 2" cowl Anybody run one?

    Does anybody here have the Jegs Alum. 2" cowl hood? Was wondering what type of quality it is and how it lined up. AMD (auto metal direct) makes it. Weighs 17 pounds. :) My only issue is if I get caught in a hail storm with this hood...gonna avoid rain anyways. Any reason why I...
  16. TrophyHead

    Smoked headlights & GT fogs anybody got em'

    I see CJ pony parts sell smoked headlights with amber corners. These are the lights I'm going to get. Problem is with the Fog lights....the smoked ones they sell at CJ pony parts are a shade darker. Not good enough for me. I see MustangUnlimted sells 2 kinds of smoked fogs. One darker...
  17. TrophyHead

    Coil relocation

    Hi, friends. I've seen alot of pics of guys running there igntion coil to the left side of there engine bay. Should I tie into my TFI wiring? From the TMoss wiring diagram looks like I could grab the hot right there for coil connector. Not sure where to grab neutral?...fuel...
  18. TrophyHead

    Gauge Cluster needle help

    When you guys turn your car off do all needles go back to bottom? I thought I did this right but maybe not. My gas gauge is staying at 3/4 full and my oil pressure gauge is staying half way with car off. Everything else is dropping. White face guage install went wrong I guess. I'll...
  19. TrophyHead

    Quad Shock problem....FOX 03 Cobra wheels

    Hi, Having an issue with my quad shocks rubbing on tire. 275/45 Nitto DR on 03 10th anni wheels. Using KYB quads. I cut the covers off shock thinking this would solve the clearance but no. Flipping does not help the problem. Will Ford quad shocks work? Can someone measure the fat...
  20. TrophyHead

    AC lines going into firewall

    Do I need to remove my dash to get these AC lines off the firewall? I'm not really sure whats behind there. I'd like to get rid of these lines and smooth before I spray the engine bay. Is this part inside those black plastic vents? Also theres two studs coming through the passenger...