Search results

  1. larsnuhsaq

    Window run channel seals

    Alright, got the seal in the window guide inside the door, but it wont stay in there and the window baerly rolls up and not all the way. I can't see anywhere this is obviously binding. The top part of the run channel seal around the door frame seems to somewhat lock in place, but the in-door...
  2. larsnuhsaq

    Window run channel seals

    Took off the door panel and it is still hard to get to the track on the front of the glass to put in the seal. It goes about a foot and a half down in the door. I will try to spray some more silicone on the back side of the seal and pull it down while rolling up the window. I'll let you know...
  3. larsnuhsaq

    Window run channel seals

    Anyone have any tips on replacing the run channel seals? Is there an easy way to get them down in the door and into the window guide? I sprayed them down with silicone, but when I try to get them down they just pop out of the guide, and the window will not push them in itself. Thanks for any...
  4. larsnuhsaq

    TKO or 3550?

    NVM I just got off the phone with TTC, and we deciphered the part # on the tranny. He said that even the new TKOs are the 3550 case with upgrades, so the only way to tell is by the # or count tailshaft splines.
  5. larsnuhsaq

    TKO or 3550?

    Anyone know how to tell the difference? The one I'm looking at says 3550 on the riveted plate, but doesn't say TKO anywhere? Were the early TKOs just upgraded 3550s with the different tailshafts and internals? Thanks Carl
  6. larsnuhsaq

    Starter noise

    The flywheel is different, teeth are OK, and the starter and solenoid are both brand new. It had this same problem before and after the clutch install. I did not see any wires crossed or damaged in the ignition, either. There has to be a simple solution, I'm pretty sure I'm just missing...
  7. larsnuhsaq

    Starter noise

    Hey guys, gettin back in the Stang game after a brief hiatus. Bought a 93 2.3 5spd driver. The starter worked fine, but it sounded as if the bendix was sticking, as it made the familiar noise about 2 secs after start-up. I assumed it was the starter, so while I was swithcing out for a new...