Expired 1990 Lx 5.0 Coupe Rolling Chassis Black/black

Status
Not open for further replies.

50racer

New Member
May 8, 2003
10
0
1
South Florida
I am selling my project. Car is located in Coral Springs, FL. Car is a clean titled 1990 Original black on black 5.0 5 speed LX coupe. Custom paint job the hood is fiberglass so it looks like fiberglass tearing around the ford racing logo and it transitions into tearing sheet metal once on the quarter panels and goes down to snake eyes on each side of the car. The following is a list of parts on the car:
Cervinnis 4" cowl fiberglass hood
8.8 rear is shortened 1.5 inches on each side
9" ford ends
33 spline spool
33 spline strange 5 lug axles (new 0 passes)
3.27 gears (was for twin turbo)
Aerospace Dual caliper rear brakes (new)
Steeda double adjustable rear upper control arms
Steeda aluminum solid rear lower control arms
Lakewood 50/50 (rear) 90/10 (front)
98 mustang 5 lug conversion up front
UPR billet caster camber plates (new)
UPR coil over front (new)
Tubular kmember and aarms (new)
Manual steering rack
Billet Specialties Street Lite 15x4 and 15x10 rims (new)
Mickey Thompson 275/60 15 drag radials
Subframe connectors
Driveshaft loop
20140905_082605_Burst01_zps0pdttrj4.jpg
20150419_101801_zpsojbni3qi.jpg
20150419_101741_zps8idb7kzg.jpg

Click here for more photos here

Interior is out of the car for a cage to be installed. I have a 10pt Wolfe Racecraft chrome moly jig notched cage (hold and weld ) I have a new black carpet for the interior and 2 new Corbeau Clubman seats for the front. The stock back seat I no longer have as it was going to have a rear seat delete put in after the cage. I have all the stock interior panels, headliner, door panels etc.

I am asking 9500 obo for everything. You can email or text me at show contact info
 
  • Sponsors (?)


Status
Not open for further replies.