HELP! MAF conversion Part numbers!

[bondoman]

I'm trying to build up a single document that lists all the ECU and MAF sensors that can be used for 5.X conversion/upgrade projects. I plan to update my 87 and convert all my 60's mustang's to 90's+ EFI engines. I need a junkyard parts search list and wanted to have all my options for parts in a single document. I figure that others would benefit as well. If this information has already been complied by someone then please let me know where I can find a copy. I will post the list in a couple of different places for others to find/use that will not disappear over time.

I need the ECU & MAF sensor part numbers for Standard and AOD conversion.
I would like to have the list weighted in order of most desirable to least. California cars part number and Rest of US car numbers.

Everyone with a 88+ California 5.0L or 5.8L EFI car info welcome. All Mustangs for 89+ from the rest of the US also. Will need info like 5-speed or AOD tranny.

So pop your hoods and let me know your Part numbers.
All help/opinions welcome,
John

 

[bondoman]

Here is the information that I have to date:

Sensor numbers:
E9ZF-12B579-AA - 89 Ford Mustang Federal (?17lb or 19lb Calibrated?)
F1ZF 12B579-AA - 93 3.8L Taurus (17lb calibrated?)

Computer Numbers (catch code):
E9ZZ 12A650 AA (A9L) or
E9ZF 12A650 AA (A9L) Manual transmission hard top:
E9ZF 12A650 BA (A9L) Manual transmission convertible:
E9ZF 12A650 C2A (A9P) or
E9ZZ 12A650 CA or
E9ZF 12A650 CA Automatic transimission:
F3ZF 12A650 BA (A9P) early 90's Automatic transimission:
F3ZF 12A650 AA (A9L) early 90's Manual transmission:
F3ZF 12A650 DA or DF early 90's Universal EEC:
F3ZF 12A650 CA 93 cobra computer: requires MAF calibrated for 24#
injectors.
F07F 12A650-DA 91 Ford pickup

E8 (A3M1) 1988 California mustang
E9 (A9M) 1989 mustang
E9 (A9S) 1989 California mustang

A9L is the most common 89-93 MAF 5-speed computer catch code
T4M0 is the most common 94-95 MAF 5-speed/E0D computer catch code
J4J1 is the catch code on 94-95 Cobra computers
ZA0 is the catch code used on the Cobra-R!!!

Sensor number in question:

F07F-12B579-A2C - Ford Explorer 91-94 6-cyl
FOCF-12B579-A2C-AFH38-06 - Ford Escort Mercury Tracer 6cyl
F6DF-12B579-DB 6H23-2 - Ford F150 F250 Van Mass Air Flow 1997 4.6 75mm

Misc parts:

E3AZ-9E731-A - Speed Sensor
E4AB-14489-AA - electrical connector pigtail

Injectors (top color/body color):
Ford stock 14lb (grey/black) E59E-A2B 195500-0733
Ford stock 17lb ()
Ford stock 19lb (orange/black) FOTE-D5B028 0150 556 or FOTE-9F593-DB5
Ford/Bosch 19lb (orange/orange)
Ford SVO/Racing 24lb (blue/black)
Ford stock 24lb (brown/brown)
GM/Ford 24lb (Black/Grey)
Ford/Bosch 30lb (red/black)/(red/grey) bosch #0 280 150 945
Ford stock 35lb (brown/gold) E5ZE-A3B
Ford SVO 36lb (black/grey) F7PU-A4A9F593
Ford stock 36lb (brown/gold) E5ZE-A3A
Brothers Performance 38lb (black/black)
Ford SVO 42lb (light green/black) M-9593-F302
Lucas 42lb (light green ring/black) D3181AA 1049 621031

MISC Info:
These measurements are made from the bottom of the intake manifold, where it meets the
block, to the top of the upper intake manifold:

1986-93 Mustang Intake Manifold 11 inches tall
1994-95 Mustang Intake Manifold 9.5 inches tall
1995-2001 Explorer Intake Manifold 11.5 inches tall


Please offer additional information and corrections.

 

[jgonz727]

This could be a very good resource if more info were contributed...

 

[soontobefastfox]

This could be a very good resource if more info were contributed...

what more info would you like? I have scans of the step by step instructions on how to convert, if you'd like I can post them here or PM them to you.

 

[jgonz727]

see my thread: Which MAF should I have? http://forums.stangnet.com/showthread.php?t=674674