Sound of my car, krank it up!

[84convertablegt]

OK, in a previous thread concerning whether or not to run an h pipe or no h pipe, i said i liked it alot better without an h pipe... i promised a sound clip of the car when the exhaust is done. here it is. this is tri y headers, 2.5 inch pipe to original 2 chamber old school flowmasters with dumps... u can hear my mild cam in there too. the sqeaking u may hear is a new aluminum pulley slipping a bit, not something major ok, make sure its up loud! Try the first one, and thanks meanroy!
http://www.protoworks.com/Mustang/HomeAgain/sounds/65idleandrev.wav
This one below only works when geocities decides its ok.
http://www.geocities.com/tichendorf/65idleandrev.wav

 

[jes72mustang]

Nice sound

I really like the way that sounds. I don't think I would change a thing. I have been trying to figure out how a want to do my exhaust, but that will probably be next winter's project.

 

[golf4283]

The sound won't work for me.

 

[84convertablegt]

hummm, its just a .wav file. maybe you dont have the correct codec for it. i know it will work in apple quicktime player for sure, thats what it was made in.

 

[84convertablegt]

ok, i guess geocities sucks worse than i thought, it has timed out... my ftp program is shot, otherwise id put it on my real site. sorry, if anyone wants to hear it , shoot me an email at [email protected] ..try the link first, and if it doesnt work, email me and ill send it to you.

 

[geostang351]

What kind of Cam you running? Specs?

 

[meanroy]

Wav file.

ok, i guess geocities sucks worse than i thought, it has timed out... my ftp program is shot, otherwise id put it on my real site. sorry, if anyone wants to hear it , shoot me an email at [email protected] ..try the link first, and if it doesnt work, email me and ill send it to you.

Send it to [email protected] and I'll post it on my site and link back to it for you.

Roy.

=========
Remove the NOSPAM to make it real.

 

[84convertablegt]

its a generic grind based off of the edelbrock cam... specs i believe are Duration Int 270' Exh. 280' Lift Int. 448' Exh. 472'

 

[2nd Mustang]

Yahoo! GeoCities
Yahoo!

Sorry, this site is temporarily unavailable!
The web site you are trying to access has exceeded its allocated data transfer. Visit our help area for more information.

Access to this site will be restored within an hour. Please try again later.

 

[PJx5x]

Sounds nice

http://209.123.181.219/~pjx5x/65idleandrev.wav

 

[meanroy]

Sounds nice

http://209.123.181.219/~pjx5x/65idleandrev.wav

Here ya go Bro.
I did a page and the raw file.

Here's the page.


Oh duh.
Here's the file.

 

[calpolymustang]

sounds good

i recorded these before rebuilding my heads. if you listen closely you can hear the loose rocker arm

http://www.geocities.com/polybrian55/1st.wav
turn volume down, theres a delay before the sound starts

and
http://us.share.geocities.com/polybrian55/2nd.wav

 

[calpolymustang]

heres a burnout:

http://www.geocities.com/polybrian55/66FastbackBurnout.mpg

 

[84convertablegt]

sounds good... i heard them, sounds almost like a late model efi 5.0... sounds good though

 

[limey66]

OK, in a previous thread concerning whether or not to run an h pipe or no h pipe, i said i liked it alot better without an h pipe... i promised a sound clip of the car when the exhaust is done. here it is. this is tri y headers, 2.5 inch pipe to original 2 chamber old school flowmasters with dumps... u can hear my mild cam in there too. the sqeaking u may hear is a new aluminum pulley slipping a bit, not something major ok, make sure its up loud! Try the first one, and thanks meanroy!
http://www.protoworks.com/Mustang/HomeAgain/sounds/65idleandrev.wav
This one below only works when geocities decides its ok.
http://www.geocities.com/tichendorf/65idleandrev.wav

Thanks 84convertablegt, it was my pre-crash thread. That sounds great to me - I can't wait to get mine sorted and running.

I'm already planning on mods and I haven't even driven a mile in it yet...