Off the top of my head...
12mm 12 pt swivel socket (d/s bolts)
spanner wrench for holding diff flange
1/2" torque wrench (electronic or click type) head gaskets, ball joints, tires
3/8" torque wrench (electronic or click type) almost everything else
1/4" or 3/8" beam type torque wrench to check crush sleeve preload
dial indicator piston petrusion ring gear runout rotor runout
disconnect tools for AC and fuel lines
deadblow hammer with long head getting pistons out
long extension (3' or so) for removing upper bellhousing bolts
All I can think of right now.