Firmware: MS3 1.6.2 release      20251203 11:52GMT (c) JSM/KC *******
Saved: Sat Aug 08 18:39:29 CDT 2026
Algorithm: Speed Density
Cylinders: 8

--- Injector Configuration ---
Architecture: MS3 1.6.x voltage×pressure table
Dead Time:
  @ 12.0V: 1.240ms
  @ 13.5V: 1.030ms
  @ 14.0V: 0.970ms
  @ 14.5V: 0.930ms
  Voltage breakpoints (V): 8.0, 10.0, 12.0, 13.0, 14.0, 15.0
  Dead time curve (ms):    2.350, 1.690, 1.240, 1.090, 0.970, 0.890
  At lowest pressure setting: 43.5 (firmware-defined units)
Req Fuel: 5.5ms
Divider: 4.0
Injectors: 8
Injector Size: 756.0cc
Firing: Alternating

--- EGO / Closed Loop ---
EGO Authority: ±15.0%
EGO Steps/Cycle: 32.0
EGO Min RPM: 1300.0
EGO Start Delay: 20.0s
EGO Delay After FC: 0.0s

--- DFCO (Overrun Fuel Cut) ---
FC Delay: 1.0s

--- Warmup Enrichment (WUE) ---
Temp (°F):    -20   1.1  22.2  43.3  64.4  85.6 106.7 127.8 148.9   160
WUE (%):      150   144   139   133   128   122   117   111   106   100
  → WUE at 160°F: 100%  ✓ At 100% — no filtering needed

--- After Start Enrichment (ASE) ---
ASE (%):     33    30    27    25    22    19    16    14    11     8

--- Accel Enrichment (AE) ---
AE Duration: 0.4s
AE Cold Adder: 15.0ms
AE Cold Multiplier: 130.0%
TPS Threshold: 60.0 %/s
MAP Threshold: 100.0 kPa/s
AE RPM Range: 2500.0 - 5000.0
Decel Enleanment: 100.0%
TPS AE Curve: 60%/s, 200%/s, 350%/s, 800%/s → 11ms, 19ms, 24ms, 30ms

========== MAT CORRECTION (FUEL) ==========
Sensor calibration: bias 0°F, multiplier 100%

--- MAT Corr v1 (legacy 6-row) ---
Temp (°F):        40      60     100     130     160     180
Correction:     +0.0    +0.0    +0.0    +0.0    +0.0    +0.0
Status: DISABLED

--- MAT Corr v2 (active 9-row) ---
Temp (°F):       -40      -4      32      59      86     113     140     194     248
Correction:   +110.7  +107.2  +103.6  +102.0  +100.4   +99.6   +99.2   +98.0   +97.0

Active range: -40°F → 248°F  (288°F span)
Correction:   110.7% → 97.0%  (-13.7% change)
Slope:        -0.048%/°F
Direction:    correct (pulls fuel as MAT rises)
Ideal-gas slope at this MAT range: -0.156%/°F
Compensation: 30% of theoretical
Verdict:      ⚠️ UNDER-COMPENSATING — table delivers only 30% of theoretical density correction. Engine will go lean at hot MAT.

--- MAT SPARK RETARD (knock protection) ---
Temp (°F):       140     160     180     200     220     240
Retard (°):      0.0     0.5     1.5     3.0     4.0     5.0
Active from 160°F, max retard 5.0° at 240°F

MAT VERDICT GUIDE
  85-110% of theoretical = well-tuned
  50-85%  = under-compensated, VE corrections will absorb MAT error
  <50% or backwards = MAT correction needs work before VE tuning
  >130%   = over-compensated, fuel pulled too aggressively at hot MAT

--- Rev Limiter ---
Rev Limit: 6400.0 RPM
Hysteresis: 200.0 RPM
Retard Mode: Progressive retard
Fuel Cut: On
Max Retard: 15.0 deg

--- Sensors ---
CLT Sensor: Normal
Cranking RPM: 350.0 RPM

--- Tables Found ---
  veTable1: 16x16
  veTable2: 16x16
  veTable3: 16x16
  afrTable1: 12x12
  afrTable2: 12x12
  advanceTable1: 16x16
  advanceTable2: 16x16


=== veTable1 (flipped for VE tool) ===

--- Injector Dead Time ---
Architecture: MS3 1.6.x voltage×pressure table
  @ 12.0V: 1.240ms
  @ 13.5V: 1.030ms
  @ 14.0V: 0.970ms
  @ 14.5V: 0.930ms

--- EGO ---
Authority: ±15.0%
Min RPM: 1300.0
Post-FC EGO Delay: 0.0s

Req Fuel: 5.5ms | Divider: 4.0 | Firing: Alternating
Injector Size: 756.0cc | Count: 8

RPM Breakpoints: 750, 1000, 1400, 1800, 2200, 2600, 3000, 3600, 4000, 4400, 4800, 5200, 5400, 5800, 6200, 6600
MAP Breakpoints: 225, 200, 175, 150, 125, 100, 90, 80, 70, 60, 55, 50, 45, 40, 35, 30

VE Table (paste into tool):
59.8	60.4	61.3	61.8	62.7	63.6	64.5	65.8	66.8	68.3	67.7	71.6	70.6	68.5	66.5	67.2
58.9	59.4	60.3	60.7	61.6	62.3	63.1	64.3	65.2	66.7	65.6	68.2	67.1	66.7	66.7	68
57.8	58.5	59.6	60.2	61.3	62.3	63.4	63.8	64.6	65.5	63.3	65.1	64.4	65	66	66.9
56.6	57.6	58.5	59.5	60.9	62.1	63.5	62.9	63	64.1	61.5	63.3	63.1	63.9	65.3	66.4
58.7	56.9	56.3	55.4	56	56.8	59.2	58.8	60.1	60.4	57.2	57.7	57.8	60.3	61.9	62.9
57.6	55.3	52.8	47	48.8	50.2	51.1	52.5	55.5	55.7	52.5	50.8	51.2	55.5	57.3	58.1
56.9	48.3	47.8	42.3	44.8	48.3	49.8	49.7	53.8	54.8	52.7	51.7	52.6	53.7	55.2	56.4
47.1	40.6	39.7	37.9	40	42.3	44.9	48.1	52.8	53.7	49.3	51.8	52.5	53.3	54.6	55.5
42.8	36.4	34.5	33.4	35.2	37.2	38.2	42.4	47.2	47.7	47.2	48.7	49.4	50	50.9	51.3
38.7	33.9	31.9	31.5	32.3	32.4	34.1	37.6	41.7	44.6	45.7	47.1	47.8	48.4	49.1	50
34.4	34	28.6	28.8	30.4	30.3	31.8	34.8	40.1	44.7	48	48.9	49.2	49.8	50.5	51.1
29.2	27.7	24.9	27.8	29.9	29.4	29.7	31.9	35.8	39.6	42.2	43	43.2	43.8	44.4	44.9
28.6	29.4	24.1	25.9	28.4	27.5	28.6	30	34.7	34.1	35.9	36.6	36.8	37.3	37.8	38.3
28.4	27.6	23.9	26.6	29	28.6	29.1	29.6	31.1	30.7	29.9	31.3	31.5	32	32.4	32.7
30.4	28.2	24.9	24.8	26.9	26.2	28.3	28.8	26.4	24	24.2	25.8	26	26.4	26.7	27
31.8	28.5	23.1	23.9	24.7	23.4	25.7	27	25.4	23.8	23.4	24.7	25.1	25.8	26.5	27.2