I seen these taillights on a photo and i really like them but i can’t find them anywhere. Does anyone know what they are and where i could find them?

My 2024 Mustnag GT showed up. During inspecting it I noticed both doors below the door handles there are swale dents that are very noticeable viewing at an angle. They are about the size of a coffee saucer. Dealer said they must come that way because they are on both sides. I disagree. After looking at many pictures of actual cars on the internet I doubt that this is true. Can someone check their 2024 and reply what you find? I think this area should be smooth to the edge of the door.

Question:

Does anybody ever click on the [Hot] button?

I’m buying a fuel tank kit for my 1990 foxbody and it comes with a 255lph fuel pump which is to big for my foxbodyand comes with a bracket can I buy a 190lph fuel pump and use the same bracket from the 255lph

I'm currently having issues when I put my mustang in drive it stalls out. If left in r n or p it idles fine. If I give it gas it will run fine in d and hit into n while stopping it will idle fine. Then I can drive like this but keeping it in drive without revving or driving it will shut down. So far I replaced the iac, the spark plug wires, spark plugs are fairly new, new battery, alternator, water pump, ac. I'm scatching my head and I'm thinking it's either the tps or speed sensor I have some pics please help me the stupid emissions are coming.

I'm new, i have a 2002 GT with a parasitic drain. It is narrowed down to the MAXI Fuse 7 in the Engine bay and Fuse 37 under the drivers side. Does anybody have a wiring diagram they they could share? I'm trying to find out what exactly Fuse 37 powers so i can try to find the drain.

Would love some tips if anyone out there has completely disassembled the rear brake calipers from a 2015 Mustang GT or similar. I want to get the calipers powder coated, which of course requires them to be completely taken apart with everything removed, including the integrated parking brake mechanism. The parking brake mechanism is what I don't immediately know how to remove. There is a snap ring inside the caliper cylinder, and the bracket on the outside has a washer that seems to be friction locked around the bolt protruding from the caliper. Is it as simple as using a puller to pull the bracket and washer off the bolt, then removing the snap ring and pulling the bolt out through the cylinder?

I'm trying to find out what's the name of this part running behind the engine and connected to this hose going to the water pump looks like.

How much is the cost to replace motor due to lack of oil changes on time?

Where can I find replacement convertible top frame parts for 91 fox body the part is called center side rail or maybe intermediate rail it's metal and part of the frame of convertible , pictures show piece on passenger side is this piece replaceable thank you for your time.

Hi guys I have a 1993 mustang LX and it won't start. The car has power it turns the lights on and everything. When I try to start the car it doesn't crank. The starter works but it won't crank.

Any ideas?

Maybe it's the ignition switch?

Hi all, I just purchased a radiator cover for my 2003 cobra and it didn’t come with the terminator lettering on top. I am looking for a decal or individual letters that can spell this out. I can’t find it anywhere on the Internet.

I have an sandrail with a 99 3.8. The guy I bought it from said it was dynod at 197 hp. I am looking for a turbo kit. To add another 100-125 hp if possible on 91 octane. I am tearing the motor down for a full rebuild. I am a decent vw wrench. Many turbo vws. Just new to the 3.8.
Any suggestions on a company that can help?