Search results

  1. D

    FloPro's Single Turbo GTS (PICS!!!!!!!)

    Yep, I know Darin ;) - he lives real close to me, he has worked on my car almost as much as I have, hehe. I have the hallman by virtue of the fact that its the one that came with the kit. if I could get my boost datalogger working right, I might have some solid data on how well its working...
  2. D

    FloPro's Single Turbo GTS (PICS!!!!!!!)

    I have the old spec Stage 3, adn it seems to be holding ok for now. My last Dyno run the guy running it said it started slipping at about 4500 RPM's. I think it was just really hot from the 5 back to back runs. Keep in mind that your car will make nasty-powerstroke-diesel-like torque at low...
  3. D

    FloPro's Single Turbo GTS (PICS!!!!!!!)

    You are gonna love it! That is all..
  4. D

    Iron GT-40 Head question

    65.5 is off the shelf. The heads as they came on the car were a lot smaller chambers since the comp ratio of a 94-95 cobra was 9.35:1 not the 8.8:1 listed in that article. -Jason
  5. D

    Post Pics of you aftermarket Gauge Setup!

    No nighttime pics, but this is my dash pod with the shiftlight LED's installed. I left the autometer bulb condoms off, so its just yellowy-white light at night. Boost/AFR/EGT are all on the Zeitronix display. -Jason
  6. D

    tweecer noob

    Fix your MAF trasnfer, make sure your injector slopes are right, and make sure the minimum pulsewidh on the injectors is right. Are you using a transfer from an actual sheet that came with your MAF, or are you just using a pre-laoded one that is tha same model as your MAF? -Jason
  7. D

    Head gaskets installed backwards???

    Would it really overheat in a noticeable fashion? Installing the gasket backwards only blocks the water ports off in the back of the head. The coolant in the back of the motor will simply pool up an not flow. The motor will be hotter in the rear of the engine than in the front, but with the...
  8. D

    aftermarket alternator bracket for 94-95?

    If you just take the stock alternator/smog bracket and cut it down and paint it, it does look a LOT better. Easy to do with an angle grinder and a dremel, and onlys costs you a bit of paint. -Jason
  9. D

    Anyone used this turbo kit? Opinions, i have 4 grand to spend!

    I actually have this kit on my car and have driven it around and can say with certainty that it makes sick power, and now that its actually running, I am pretty happy with it. I bought it used, and I am not a total moron, so since I have never actually called TCP to order, or needed any support...
  10. D

    Where to buy rear caliper tool?

    It looks like a little cube with different notches on it. The one I got from napa still didnt fit the rear calipers - so i took a dremel and ground 2 of the big notches down so it would fit properly. -Jason
  11. D

    Let's talk TURBOS!!!

    You definately have some reading ahead of you. But dont worry, it all makes sense after a while ;) turbomustangs.com search function will be your best friend for a while. IMO - I would think the best bang/buck turbo you will find for your car is probably a Master Power T-70. Definately one of...
  12. D

    Weight difference between stock hood and cobra R

    Being that I actually carried both hoods over my head at one point or another, I will say with certainty that the Kaenan fiberglass Cobra R hood is _significantly_ lighter than the stock Cobra hood. The fiberglass on my stocker was cracked at the front from a flying object hitting it on the...
  13. D

    Need help. Pro-M mass air to fender filter.

    Silicone couplers or elbows can be found here. http://www.racepartsolutions.com/categories.asp?cat=90 The T-bolts might be a bit much for just a CAI though. The stainless worm clamps from Home Depot should work fine. ;) -Jason
  14. D

    How to install braided fuel line ends?

    And for the love of god dont use a hacksaw... -Jason
  15. D

    Puked oil under boost

    Sounds like the valve was/is bad if it blew it out of the manifold instead of just blowing air through the valve. Then again depending on where the other end of the hose goes with the Kenne Bell, it might not have opened because there was boost pressure pushing against the other side. I dont...
  16. D

    Puked oil under boost

    Make sure your PCV valve is still good. You might have just been blowing boost into the crankcase if its broke. -Jason
  17. D

    moroso palm beach

  18. D

    moroso palm beach

    Wait till midnight madness night. I got in 15 passes from 6:30pm-1:45am last time ;) -Jason
  19. D

    Tweecer And Wideband Question

    Most all widebands will work if they have an analog out wire. I havent heard any real complaints yet about Innovatives, PLX, Zeitronix, FJO's or Dynojets. To get it to read in the Tweecer dashboard though you need to have removed your EGR system so you can wire the analog out into the old...
  20. D

    Dyno Tunes? Tell me more please?

    I sencond Gradys opionion. Having a Tweecer is great, but if you go that route - you cant tune A/F for beans without a wideband. -Jason
Top Bottom
Back
Forums
Menu