Search results

  1. F

    1995 Mustang Gt new pcm wont start

    +4 on it being the PIP sensor that might be your issue
  2. F

    Can't win for losing

    I would take it to a actual transmission shop .The dealer will rip you off big time my parents have a 05 ford escape and the tranny went out on it about a month ago .They got it fixed for 1,800 dollars at a transmission shop and it has a one year warranty .The dealer wanted over 2,500 for it
  3. F

    Noise & Vibration out of T5 in low speed/high torque situations

    the poly mount might be part of the issue if it reduces the vibration you might have a problem with either the clutch or the transmission my cousin has a 90 fox body and we had a very similiar issue for him it ended being the flywheel even though it was brand new
  4. F

    Noise & Vibration out of T5 in low speed/high torque situations

    if you have the poly mount for the transmissions theres your problem since our crossmember doesnt have rubber bushings the stiffer mount makes the vibrartions go through the chassis
  5. F

    cobra intake swap help

    double check all your vacuum hoses especially the one that goes to the EGR that might be the why its throwing the code
  6. F

    cobra intake swap help

    Oh ya, I did use the fiberglass spacer that goes between the upper/lower intake, but did not use a gasket between those layers, should I go back and gasket those as well?? Definately need the gaskets your lettting unmetered air and that causes a lean code
  7. F

    Bumper swap

    its direct swap so you should be good
  8. F

    Need help installing the rear control arm

    another thing you can do is unbolt the driveshaft and let the rearend drop some more this will give you a little more play to get the arms in and then jack up the whole rear end at the same time I had to install a rear end by myself and thats how I did it
  9. F

    Intermittent wipers working..... intermittently

    Its the wiper switch this is a known issue with our cars you can try taking it apart and cleaning it with electric parts cleaner and reinstalling it .Sometimes it fixes it sometimes it doesnt then it would be time for a new one
  10. F

    H-PIPE

    the offroad pipe should have a hookup for it any of the main brands have it like (BBK, MAC, )
  11. F

    94 gt Racks Radiators!!!

    TOO late for me mine Fluidyne sprung a leak two years after the warranty was up piece of junk I bought a summit racing universal and I've had it for 4 years with no issues
  12. F

    Bad Vibration 5.0

    I had this exact problem with the King cobra clutch by any chance did you replace the flywheel or got it resurfaced? Mine issue ended up being the flywheel replaced it with another one and the vibration was gone
  13. F

    SN95 Body parts

    heres the link to Davis3 panel replacement http://www.stangnet.com/mustang-forums/789191-passenger-side-1-4-panel-repair.html
  14. F

    95 GT running VERY rich

    since its fuel related have you changed your fuel filter? Also check the pressure with and without the vacuum house attached to the fuel pressure regulator it should be around 38-40 with the hose off and 32-35 when its on adjust as needed
  15. F

    Car is finally DONE, but there's no spark!!

    try swaping out the distributor if the PIP went bad in the distributor this will cause a no spark situation also check your grounds
  16. F

    Converting to a Carb'd Setup

    it would just as expensive to convert it to carb with no big benefits if you get a tuner software like tweecer or quarterhorse you can keep tunning your car as you make changes to it mail order chips are not always dead on .
  17. F

    MAC Headers

    I have the MAC equal length I havent had issues with them since I got them 5 years ago just make sure you use the copper gasket and you'll be fine
  18. F

    ac compressor not engaging

    I think your still too low on freon for the compressor to even engage
  19. F

    Difference in 94-98 doors?

    the doors should be the same looks like when it got hit it also affected the quater panel or it might not be put on right and the striker when the door latches onto might be tweaked a little that its pushing the door out like that
  20. F

    Magnaflow Catted H-pipe

    I have that H pipe on my cobra its fits pretty good I didnt have issues putting it on
Top Bottom
Back
Forums
Menu