Search results

  1. Stanger007

    Stanger007 - Anyone heard from Wes?

    Hey there - all is well. Began building a race track in December 2009, we are nearing opening, life has been very busy! NOLA Motorsports Park - New Orleans, Louisiana race track, go karts, performance driving schools Still doing tuning but mostly supporting dealers now and working on...
  2. Stanger007

    Tune Issues...

    Adam, send me an email, got something for you - [email protected]. Wes
  3. Stanger007

    Tune Issues...

    Post up a log and we'll take a look. Car should run pretty ok with the 24s, 24lb meter (for a GT) and a tune. Sure there are no exhaust or vacuum leaks hanging around? Wes
  4. Stanger007

    73 mach 1 build

    I'm considering black with argent stripes or keeping it blue but changing to the new Mach 1 azure blue with black stripes. Leaning towards the new Mach 1 azure blue. Wes
  5. Stanger007

    73 mach 1 build

    Great build, we have similar plans with the fuel injection and turbos. My first step was to put together a EFI system from a foxbody and tune it. Now that the system is installed and working (gained about 15rwhp over carb) it's time to begin taking the car apart for a fresh coat of paint. Wes
  6. Stanger007

    Trying to hit 475hp to the rear wheels

    I like a good aluminum head with a thick deck for higher power levels to keep things in place. ARP bolts or head studs with a 9333-pt1 gasket. Wes
  7. Stanger007

    Trying to hit 475hp to the rear wheels

    I'm there with s-trim at about 17psi through a 4R70W and trickflow heads, stock cam and cobra intake (ported lower). Running methanol injection. Stock bottomend with 155,000 miles driven daily. Went to SCT2400 MAF and 60lb injectors. Running two 255lph fuel pumps, one was not enough, stock...
  8. Stanger007

    Will a Auto ecu work on a Manual car thats been converted to auto?

    Your chip will plug directly into any of the PCMs listed above and work properly. Wes
  9. Stanger007

    Will a Auto ecu work on a Manual car thats been converted to auto?

    Yes, an auto PCM (U4P0, W4H0) can be reflashed as any other in the same family (J4J1, T4M0). Cannot flash a stick car to run an auto transmission though. Wes
  10. Stanger007

    Inconsistant dyno results. confused

    The dyno operator should be able to look at wheel speed vs engine speed to find any driveline/tire slip. Wes
  11. Stanger007

    max numbers made with a cobra intake?

    My car is right at 500rw through the auto and runs low 11s. I had tmoss port my lower. Supercharger with stock cam. Nice intake for a stock piece. Wes
  12. Stanger007

    94 Mustang Barometric PSI Sensor?

    I believe it's a non-replaceable part of the PCM circuitboard. Wes
  13. Stanger007

    Converting a 73 to a 71?

    And what color blue is that? Wes
  14. Stanger007

    Who has/had both TweecerRT and PMS

    No, I haven't run across that one yet! Wes
  15. Stanger007

    Who has/had both TweecerRT and PMS

    I'm spoiled by the flexibility that a QuarterHorse/twEECer gives over the PMS. Some will be happy with the ease of use the PMS gives, some will not. It is a tradeoff between having ultimate control and ultimate ease of use. I work with both although the number of PMS systems is getting to...
  16. Stanger007

    Supercharger exhaust backfire

    Agreed. Wes
  17. Stanger007

    Supercharger exhaust backfire

    Look at what makes a backfire - if you believe your timing to be correct then you have unburned fuel in the exhaust. Because this happens at higher RPMs you are likely blowing out the spark or having the spark cut (limiter). Try gapping the plugs down or raising the limiter temporarily to...
  18. Stanger007

    Recommened Struts/shocks

    I run the D-spec, great shock/strut for how my car is driven, autocross, drag strip or daily driver depending on the day of the week. Wes
  19. Stanger007

    EFI swap question

    Not for me. :) Most people aren't putting a completely stock motor in anyways so swapping the firing order around is one of many items changed in the tuning process. Wes
  20. Stanger007

    EFI swap question

    I just changed the firing order in the tune. This allows the O2 sensors to work properly. Wes
Top Bottom
Back
Forums
Menu