Search results

  1. G

    Car runs for 3 seconds and dies!

    You mean there is an audable hiss fromt he rail like pressure escaping of noise transfer from the pump? if there is an actual hiss I would check for leaking fuel. if the pump is coming on and you have fuel in there and no restrictions in the lines then you should have fuel, also pull the...
  2. G

    How long are Nittos good for?

    for track use only you still have several passes left dependong on how much you burn them.
  3. G

    Question about emission and laws

    Michael hit it on the head. Poletitions get gready and inspections come in, luckily for me there is no emissions here, I mean I don't think they would look to kindly on a 70's block with no emissions period (no smog pump, no cats...) in a '93. Personnaly I don't worry about it, there will...
  4. G

    C-4 help!

    Shift kit is your problem. The c6 in the f-150 I am driving right now while the ranger is down is like this, it is caused by the cheaper shift kits (B&M and TCI etc), you get used to shifting manuelly. I am telling you though get a TCI street strip valve body, you won't regret it the ranger is...
  5. G

    Timing Question!!!

    Fix the miss first, I bet you fouled a plug. then hook the timimng likght up and set the timing like normal, you should be able to get it close by ear.
  6. G

    What rockers are these??? Have pic.

    those are indeed the FRPP rockers.
  7. G

    Friends broken seat

    Replace the seats. Check the yards, you can find good seats cheap if you have a good relationship with the yards.
  8. G

    White Face Gauge Overlays are Here

    HAVEII you have the right idea, we have been doing it on the rangers for awihle now, what you can do is scan them from the factory overlays and then you can put whatever you want on them (I made some FRPP ones, some with a stormy sea cliff and lightning in the background), but I ended up...
  9. G

    Couple of questions about oil pump.

    Yeah you should be fine. 10PSI rule is great, but not mandatory I have seen SBF's run with 10psi at idle and about 30 psi on up to about 5500 rpm and last another 75,000 miles. The 302 seems to do a little better than a chevy with low oil pressure (not knocking chevies, but there motors tend to...
  10. G

    aod line flush

    easiest way is to get a can of cooler flush. If you can't find it go tot he ford dealer and talk to there tranny man, they usually keep several cases on stock and it is usually like $6 a can.
  11. G

    puttin in new block and i have a couple of questions about clutch and things.

    the screw on fitting for the filter will come off the old block (screws out) or from ford they are like $5.
  12. G

    who has dumped exhaust?

    I run dumps on the 5.0 ranger out of neccisity (no clearance with the 6/8 drop), If I had a choice I would run pipes out the rear because it sounds better and is quiter in the cab (can get pretty anoying if you are trying to carry on a conversation, especially with flowmaster 40's), but I am...
  13. G

    Remanufactured Short Block?

    short block = motor and rotating assembly Long block = complete shortblock with heads (sometimes accesseries such as valve covers/pan/etc. How much are you wanting to spend? I suggest going ahead and looking a DSS 306
View older results
Top Bottom
Back
Forums
Menu