Search results

  1. sleeper_inc

    Can it be done?

    I got my E6 today (woo hoo) but its cracked (awwww ****) Anyways do any of you know if it can be welded?
  2. sleeper_inc

    idle issues (again)

    My idle all ****ed up on my car again. With the IAC unplugged and the cam installed 0*'s its idling at 1500 RPM and its a bitch to start (foot to the floor and cranking for 10 seconds) Start listing off issues because now I just wanna do the engine swap with a C3 and call it good for a year
  3. sleeper_inc

    My new engine

    Spec's 1987 Merkur XR4TI engine 150000 km's (90000 miles) ran great before removed about a month ago has a little shaft play in the turbo cracking vaccum lines Overall in good shape for only $400 :lol: it also came with a T-9 trans (will swap to a T-5 when the swap is done this fall)...
  4. sleeper_inc

    many problems

    I hit a junk yard up today and got a few goodies to tied me other for 2 weeks. I got 9x6 (or was it 10x6?) sony xplode speakers for the back of my car and they sound so much better than the stock ford speakers. I also got a TPS, and IAC from a 1990 Mustang coupe and a few underdash sensors also...
  5. sleeper_inc

    singh grooves

    Ok, I think I'll do this over the summer just for something to do. Anyways, I'm not sure what head mine is. I think it should be the hart shaped combustion camber, but could it be a different head? (1988 LX) Anyways, I'm going to post some ideas for some singh grooves Here is a design I...
  6. sleeper_inc

    Idleing to high

    My cars idling to high (2000-2200 RPM) I've found out its not the TPS, and the vacuum lines are fine at the tree, so whats the problem? I had to unplug my IAC just to keep the idle below 1500 RPM :eek: So anyone got ideas :shrug:
  7. sleeper_inc

    Showing the car

    Well, I had nothing to do today and the parents were away, so I got some pictures of my car in the driveway. Doesn't look to bad, considering its in primer :rolleyes: What do you all think of her?
  8. sleeper_inc

    2.3 Turbo Swap Info

    I haven't been on the forum that long and I'm looking at doing a 2.3 turbo swap. Is there a website with the full information? (swap, whats needed, etc, etc.) I know that stinger has done this and I have looked at all his information on the site, but it all seams blurry to me. But what do I...
Top Bottom
Back
Forums
Menu