Search results

  1. F

    Updated Engine Pics...

    colorfull setup. Im intersted as well with the engine specs. Maybe you could dress that engine up a bit with a csi tstat housing and a billit front cover and water pump.
  2. F

    Ballast Resistor

    If your running points or one of the older electronic distributers then you need some sort of resistor. if you upgraded to a modern magnetic breaker distributer and ignition box then you dont need a resistor.
  3. F

    raised white letter?

    You need to grow into the look of whitewalls, or you tend to repect them, if your car can put down 580 rwhp, get kicked off the track for not having a roll bar and win just about every open header contest, whitewalls dont seem to bad. Plus they look sexy with swimsuit models. Yea I also...
  4. F

    hooker super comp ground clearance

    If your gonna run that turd cam in a vic Jr headed 289 then you dont need a supercomp header, look into the headman mid length headers and go with a 2.5 inch exhaust, you will have great performance with max ground clearance. If you step up the compression and get a big custom cam then the 289...
  5. F

    PLUG WIRES

    If you have msd box then you need to get a good wire from msd, moroso or taylor. if you dont have box then just get the cheap wires from autozone. I like to ziptie the plug wires together in a neat manner, if they are a good wire then they wont arc. you just need to keep them clean and away...
  6. F

    hooker super comp ground clearance

    my super comps sat a tiny bit lower than my scatteshield. With cut front coils springs and a kyb shock they were only a problem over the big speed bumps. But with a drag shock and soft front spring they got beat up pretty bad durring normal sreet driving. Now I have stock front coils and alot...
  7. F

    raised white letter?

    65-66 look best with white walls and either styled steels or spinner hub caps. magnums and raised letters give them a 67+ look that doesnt fit the 65-66 classy style. My 65 has either has 205-75-14 white walls or mickey thompsans, even my mickeys have painted on whitewall......
  8. F

    Water Pump question for 65'

    Do you remember if the water pump has a backplate??? just because it has an aluminum pump doesnt mean it has the early cover, I say this because from what I remember you dont have a ford pump or atleast the 64-65 ford aluminum pump. I went with the 80's front cover that doesnt have the hole for...
  9. F

    Where is the best place to buy carbs and distributor

    A new 1850 holley and MSD ready to run distributor. A carter mechanical fuel pump. call either Summit or Jegs.
  10. F

    Small Block engine Pics

    basic fox 5.0 cooling system parts. radiator and hoses, I did have a fox tstat housing and reverse rotation pump at one very short time since they are dirt cheap but went back to the original aluminum tstat housing and switched to the moroso pump,which needed a longer lower hose. I think we...
  11. F

    Small Block engine Pics

    DP
  12. F

    Small Block engine Pics

    mount that fan to a fox body 3 row radiator and you too can cruise all day with water temps at 150.
  13. F

    Caltrac transfer link lock nuts & preload?

    thread wear no but the steel spacer tube for the front bushing will wear out at the plates if daily driven. keep them lubed and all should be good, and maybe its best not to have preload for daily driving.
  14. F

    Small Block engine Pics

  15. F

    Who has the Baddest 2V 4.6 out there?

    got this to drive every day. forgot how much power it makes and dont know what it will run................... ;)
  16. F

    gears

    very basic. remove rear wheels, remove drums, remove four bolts per axle and remove axles, remove drive shaft from axle yoke and slide out of trans, remove nuts from center section. center section and gear oil will now come out. I reccomend you have new gears setup by a profesional shop...
  17. F

    Good camshafts?

    I paid just under 300 for my solid flat custom cam and 300 for my solid roller custom cam. Well worth the money.... My 360 roller cam has 680 lift with 260 and 270 duration and .050.... 110 lsa. my 289 solid flat cam has 620 lift with 270 and 280 duration at .050. 110 lsa. Maybe a bit...
  18. F

    What engine should I build?

    347 or more for them high port heads. roller cams are nice and a solid flat tappet cam will also work great.
  19. F

    Need pics of a 65 stang with 15x10 out back.

    15x8's will work just fine with the stock suspension.
  20. F

    64/5 Radiator upgrade

    The simple upgrade is to go with a fox body setup. everything for the cooling system is easy to find and you have alot of options. I run a copper brass 3 row Modine, fox raditor hoses, moroso electric pump and a mid 90's taurus electric fan. temps never get over 150 since I only use a...
Top Bottom
Back
Forums
Menu