Search results

  1. F

    Twin Turbo 4.6??

    these are for the sn95 modular engines buit can give you an idea of before and after numbers TWIN TURBO
  2. F

    dyno results

    Sounds like a 289 Im setting up for a freind of mine. All but the cam, Your cam is small for those heads. And you are good with the carb, maybe a custom stage two rebuild from carb shop or performnce carbs will help driveablity a bit. Whats the compression and what intake are you using. Either...
  3. F

    Help me build a short block combo

    I would go with a atleast a dart sportsman block and forged scat crank and rods. SRP pistons will work great for just about anything but the big power adders. Your compression ratio will and should depend on heads and cam choice. But you may end up with around 10-11 to 1 for a street setup. My...
  4. F

    Who makes 255lph fuel pump for 99+???

    Ford pump # 3S4Z-9H307-BC
  5. F

    looking for Rear window louvers for 99 and newer GT

    Them louvers are sorta popular on the mach1, check the mach1 registry boards. I installed a one on a mach, nice aluminum construction but they attach to the glass with double sided tape. Its probably the only wy to install with out mods, but the tape only lasts so long before it loses grip. Nice...
  6. F

    post pics of inside gauges!!!!

    Dude im right there with you on that one. I had a guage console made to fit the stock cup holder hole on my 99 center console. two 2 5/8 guages, fuel and boost. looks cool as hell, one of a kind but totally usless while driving. Maybe would be good location for air temp, voltage or somthing not...
  7. F

    Whats the diffrence between drum and disc v8 spindles?

    Isnt that only for the factory 64-66 four piston caliper setup. You cant install the granda or 70 and later mustang brakes on a drum spindle, can you?
  8. F

    which Long Tubes...

    RCI, Accufab, JBA and a few others have them off the shelf. Just as long as you dont have a highport, TFS R, or yates style head. you should be just fine with the super comps and a good striat through muffler.
  9. F

    9" Rear Axle going in a '65 Coupe

    other than the rare 64-66 hipo 9 inch and the old 57-59 9 inch, you have better chance to find the rare 80 granada 9 inch with the drum brakes or the versi 9 inch with disc. I have the granada housing and had to buy it from currie but a friend of mine went to the junk yard on a half off day and...
  10. F

    what rear end

    If you have a factory stock 65 8 inch then you are not gonna make it too long. Atleast a set of 66 axles and a 67+ case, mini spool and a granada housing. There is just about nothing on the 65 8 inch that is any good for handling power. I would start shopping for a 9 inch or atleast a maveric or...
  11. F

    Looking for an alternator pulley.

    any stock ford v groove pulley should work. the fan is not part of the pulley. Ive used the stock 66 pullet, boss 302 pulley and aluminum pulley on the 130 amp alts.
  12. F

    So Cal Mustang Owners Picnic

    Sounds like a great day for a bbq. Im sure youll get quite a few stangers.
  13. F

    Unknown Part!!!!!!!

    that is the bumper.
  14. F

    Choices of HIPO trans?

    liberty, jerico, g-force, nash , richmond. I guess most here only think tremec build 5 speeds just like they think afr is the only head manufactor. I would run a toploader before a tremec 5 speed if strenght was a concern, and if that doesnt work then the only choice is to step up to a high...
  15. F

    What size tire and wheel for 66 coupe

    whoa,a 3 second sixty. My best 60 foot on radials is a 2.2, that was on a 195/75/14 whitewall, probably would have been a 2.1 but they made me take the hubcaps off. For you, no burnout and stay out the water box. DONT lower the tire pressure, try to keep it around 28-30 psi. Launch just off...
  16. F

    Spoiler removal question

    I dont even notice the holes on my trunk lid, well maybe I just dont care to much just like the rubber on the quarter panels. But maybe look out for a holeless take off trunk lid in the same color, maybe swap with someone with a v6 car.
  17. F

    4.10s and warranty

    Yea, if you set up the 4.10 and then the rear axle starts to howl, dont take it in for warranty work to get it fixed. And be carefull with plug in chips or major mods as exended warranty policies will require an inspector for any major repairs to drivetrain.
  18. F

    would gears fit?

    Sure can, no differnt than a mustang or an explorer or an f150 8.8. 2.73's to 4.10 are a simple set up and usaully needs minor if any reshiming.
  19. F

    Going from 5 bolt to 6 bolt bell housing

    there are two comon types of bells, small and large. you would want the small bell for a 157 tooth flywheel, most of these will be early bellhousing anyways and should be a direct fit on your c4. the large bell in most cases will aslo fit but you may need to change the trans bit to fit the newer...
  20. F

    rocker problem??

    they should have a preload on them at base circle. either the cams are ground to small or you could have a oiling or lifter problem, or possibly a sticking valve.
Top Bottom
Back
Forums
Menu