Search results

  1. Cyclone

    Your Stance!!

    You Can View Pic's and Description of my 1966 Mustang at the link below... http://www.allmustangandfordclub.com/MembersRide-MarlonMitchell.html
  2. Cyclone

    suspension replacing

    He said he was looking foa a stock looking suspension, Just letting him know...
  3. Cyclone

    suspension replacing

    IT LOOKS STOCK............... Hello everyone, I am Marlon, Owner & Operator of Marlo's Frame & Alignment/Fly-Ford Racing, http://www.Fly-Ford.com I have upper control arms available that do not use Bearings Or Threads, and My Coil Spring Perches are made the same way, The car will drive like...
  4. Cyclone

    Is CompCams camshaft a good selection for my 393 Stroker?

    Have someone grind you the specs for a Ford Motorsport X-303 Cam, Tha Cam Spec Would Be PERFECT
  5. Cyclone

    upgrade suspension on a budget????

    In The October Issue of "Mustang Monthly" My BluePrinted Fly-Ford Racing Suspension will Be Featured... Marlo's Frame & Alignment 818-341-0940
  6. Cyclone

    Is CompCams camshaft a good selection for my 393 Stroker?

    In my 1966 Mustang I have: 308 CID, AFR 185 Heads (2.02 Intake Valves) Holley 750 HP series Double Pumper, Edelbrock RPM Air Gap Intake Manifold, Comp Roller Retro-Fit Cam 2.24 @ 50 Advertised 2.84 Duration / 5.36 Lift / 110 degree lobe center I produce 425 at the fly wheel 348 at the...
  7. Cyclone

    Is CompCams camshaft a good selection for my 393 Stroker?

    that cam should idle well at 1,000RPM, no problem, Good Cam Choice
  8. Cyclone

    Power steering bracket???

    That should do it, I forgot about the water pump, swithing outlet sides
  9. Cyclone

    Shorty header V ported cast manifold

    Yes, The only thing we got was the X-Pipe crossover, the rest was all hand fabricated.
  10. Cyclone

    Power steering bracket???

    Have you tried installing what you have Now? I have an Eton Pump complete with brackets and all, and it does not look like it will fit, I Might be wrong though?
  11. Cyclone

    Speed Bleeders with Baer Brakes

    Click on this link........... http://www.fly-ford.com/MM0706-How_To_Choose_and_Bleed_Brake_Fluid.html
  12. Cyclone

    Shorty header V ported cast manifold

    It is a 2 1/2" Mandrel bent pipe system, Plus it was custom cut too fit, With Magna Flow Mufflers and Tips
  13. Cyclone

    Pic of My Car

    Here is a pic of my mustang, I like you blue better
  14. Cyclone

    Shorty header V ported cast manifold

    check out the article that I did for "Mustang & Fords" Magazine http://www.fly-ford.com/MustangFords0404-SoundsRight.html
  15. Cyclone

    Power steering bracket???

    the PS pump from your 260 is a bracket for an Eton PS Pump will not work for a saginaw PS Pump, Get the bracket that you saw on e-bay and get a 67 saginaw pump and hoses
  16. Cyclone

    Noise with New Front End Parts

    if you have power steering, check the bushings at the power steering cylinder, that can cause a noise also.
  17. Cyclone

    Noise with New Front End Parts

    As for the Steering Gear Box, remove the filler plug on the box and remove the bolt ( 1 ) on the top of the box ( there are 3 ) it will be the closest to the exhaust, the metal description tag, the bolt goes thru that tag, take a gease gun and pump grease into the box until you see gease come...
  18. Cyclone

    Noise with New Front End Parts

    Also, Lube Everything again and make sure that you can see all of the joints fill with grease, and simply wipe off the excess grease.
  19. Cyclone

    How much exhaust is too much?

    Here is an article that I did for Mustang & Fords Magazine, Click on the link http://www.fly-ford.com/MustangFords0404-SoundsRight.html
  20. Cyclone

    Export Brace Bar

    Here is an article that I did for "Mustang Monthly" Click on the link below... http://www.fly-ford.com/MM0105-How_To_Install_an_Export_Brace_and_a_Monte_Carlo_Bar.html
Top Bottom
Back
Forums
Menu