Search results

  1. Luis911

    Brakes 1987 - time to change the clutch quadrant

    the clutch pedal was uncoupled, and the quadrant was left with broken teeth :(:(:(, then they changed it for an equal one, and after stepping on the pedal 5 times they went back to break some teeth :(:(:(
  2. Luis911

    Brakes 1987 - time to change the clutch quadrant

    he also removed the board :O_o:
  3. Luis911

    Brakes 1987 - time to change the clutch quadrant

    He is a very obese person, I think that's why it took so long :D:D:D
  4. Luis911

    Brakes 1987 - time to change the clutch quadrant

    It sounds reasonable for someone who does not have much experience
  5. Luis911

    Brakes 1987 - time to change the clutch quadrant

    Thank you, it took several hours and 3 days :eek::eek:
  6. Luis911

    Brakes 1987 - time to change the clutch quadrant

    How much time does a mechanic need to change the quadrant clutch for an original one?
  7. Luis911

    Electrical I Had Code 92, Exchanged Oxygen Sensors, Now Code 42 (update Now Code 44 And 94)

    thanks for all the help. cleaned the tube behind the heads, it was a bit dirty, I also tried the system valves air from the smog pump and all well, I have no catalytic converter, then the codes 44 and 94 affect me?
  8. Luis911

    Electrical I Had Code 92, Exchanged Oxygen Sensors, Now Code 42 (update Now Code 44 And 94)

    I changed oxygen sensor and now have codes 44 and 94 (additional 34), now to focus on resolving these codes
  9. Luis911

    Electrical I Had Code 92, Exchanged Oxygen Sensors, Now Code 42 (update Now Code 44 And 94)

    I recently had the codes 41 and 91, bought at autozone two oxygen sensors and now I have the code 92 (Additional I have the code 34) at the forums mentioned doing a test exchanging oxygen sensor, removed the code 92 and I now have the code 42, in conclusion, the sensor I bought went wrong? that...
  10. Luis911

    Electrical Battery Ground Cable To Computer

    thanks, I have to change the main ground wire is very mistreated
  11. Luis911

    Electrical Battery Ground Cable To Computer

    In the post "Help me create the" Surging Idle Checklist "", mentioned in paragraph 10: "The battery common ground is a 10 gauge pigtail With the computer ground attached to it," where the cable is? going to the chassis of the computer?
  12. Luis911

    Electrical Where It Is Connected?

    thanks again, I have left these codes: KOEO = 34 (I have that change my valve EGR) and KOER: 34 and 92 (I had the 41 and 91, I changed the 2 Sensors of oxygen and now had the code 92, after a week to check the codes again the 41 and 91, and after 2 weeks, today I checked and I have the code 92...
  13. Luis911

    Electrical Where It Is Connected?

    thanks, could be the cause of the code 67?
  14. Luis911

    Electrical Where It Is Connected?

    there are 3 wires going to the oxygen sensor connector (driver side), but along with those 3 cable is a cable with a piece as seen in the photo, where it is connected and that connector is?
  15. Luis911

    Electrical Problem With Grounding

    thanks for the reply, and referring to the resistance between ground and battery negative which should be the right value?
  16. Luis911

    Electrical Problem With Grounding

    When I adjust the TPS sensor, the voltage should be between .97 and .98, making the measurement from the TPS sensor wires, the voltage is 0.85, but if I measure using a sensor cable and ground (for example intake), the measurement is 1.10 (on the website of latemodelrestoration.com, and measure...
  17. Luis911

    Electrical I Can Not Get Codes

    I measured the resistance between ground test computer and battery ground r = 4.5 ohms, I went back to try the codes and it gave me, thanks
  18. Luis911

    Electrical I Can Not Get Codes

    I remember this issue was already in the forum but did not find it. A week ago I had these codes: KOEO: 34,67 KOER: 41,91,34. I bought 2 oxygen sensors on autozone store, when I installed one, the car felt better, then I put the other, I disconnected the battery an hour, and when starting...
  19. Luis911

    Engine Useful Life Of The Oxygen Sensor

    recently fixed the engine, the egr valve if I have. The idle is between 750 and 1000 rpm
  20. Luis911

    Engine Useful Life Of The Oxygen Sensor

    a mechanic did a test with a scanner and tells me that a sensor is failing, I did the test with my multimeter and I get these codes: KOEO: 34, 67 KOER: 41, 91, 34 I changed the oxygen sensors in 2006, perhaps already finished its useful life?
Top Bottom
Back
Forums
Menu