Search results

  1. Slobin3d

    CORBEAU SEAT RECLINING TRS WIDE PAIR

    Got them today, the are SWEET! they are a little darker in the grey then the picture shows, but that's good, hide more dirt then if it were bright. I did a test fit on the floor, and they are comfy, they hold my butt in without and real room to slide, the side bolsters just kiss my sides, so...
  2. Slobin3d

    CORBEAU SEAT RECLINING TRS WIDE PAIR

    Ordered today, I'm so excited! I can hardly wait. Hopefully it doesn't take too long.:D
  3. Slobin3d

    CORBEAU SEAT RECLINING TRS WIDE PAIR

    I decided on these!
  4. Slobin3d

    Paint Colors

    I would get to know a paint guy before you get your heart set on any color, there are some color combos that will not work, some reds will turn pink when next to other colors, some blues turn green or purple when placed next to other colors. Some look great in low light but loose their appeal...
  5. Slobin3d

    Front Coil Springs Install Help

    I've seen that done several times, with the car under weight, use the smoke wrench to heat the springs, without cutting them and they will sag and release their tension and once they cool you can usually just pull them out
  6. Slobin3d

    CORBEAU SEAT RECLINING TRS WIDE PAIR

    No prob, they were really easy to deal with and KNOW their stuff!
  7. Slobin3d

    CORBEAU SEAT RECLINING TRS WIDE PAIR

    I called Corbeau, described the car, my height 6'6" and my waist 40-42" (depending on how much McD's I eat) and he recommended the the VX2000's they aren't as aggressive as the TRS seats, better for cruising. they are shaped for more comfort, and are designed for a taller driver in a smaller...
  8. Slobin3d

    CORBEAU SEAT RECLINING TRS WIDE PAIR

    Why the A4's? They don'y look too much different:shrug:
  9. Slobin3d

    First generation mustang Daily Driver

    Basic tune up and maint. will be extremely helpful, as will basic electrical knowledge.
  10. Slobin3d

    CORBEAU SEAT RECLINING TRS WIDE PAIR

    CORBEAU SEAT RECLINING VX2000 PAIR I was looking at these seats for my 72 project, has anyone used them before? I'm 6'6" and a 40" waist and fit well with the stock seats but they are shot, and not worth fixing as they don't offer enough side bolster for what I plan to use the car for...
  11. Slobin3d

    302 to 306 and carb

    About your pics, what format are they? if they are Bitmap nomater how small you make them they will be too large .KB to fit. If you run windows, microsoft offers a free image reducer that you can spec XxY dimentions and total KB for posting:nice:
  12. Slobin3d

    Project Check2Check My 72 Restomod

    Nice picture! I need to clean mine out and knock the dust off, the works been done just sat for too long. I have to ask, do you really see any improvement with the ram air hood? i'm putting one on mine regardless, it just seems to me that where they are mounted in the hood that at any...
  13. Slobin3d

    Project Check2Check My 72 Restomod

    I have been all over CJP:nice: I have a massive shopping list saved:eek: I got my TLP from mustang depot, it took quite a while but it showed up straight and well packed:nice: I also picked up a 1/2 gallon of fiber tech filler for cleaning up the minor imperfections. As far as updates...
  14. Slobin3d

    65 Electrical Question . . . should be easy!

    you may have burned a ground wire inside the cab too.
  15. Slobin3d

    1966 Mustang Coupe 200ci

    I agree, the one My buddy and I are working on, We've spent as much time sanding filling and massaging the front light buckets and grill as we did the rest of the car trying to get everything to fit right. If the car had been painted already we would have stripped the entire front end down by...
  16. Slobin3d

    8.8 rear end

    if an axle breaks in a c-clip vs non c-clip it's going to break under the same condition, the axle shafts are the same strength. the only difference is that by modifying the axles to no c-clip your chances of leakage is higher. since your removing the outer seal that was designed for the axle...
  17. Slobin3d

    8.8 rear end

    how many millions of them are out there and what % of them break? unless your doing something extreme, there is no reason to bother with the time and $$ to remove them to fix a nonissue. Hell I run a Spooled c-clip 28 spline Dana 35 on 33's probably the worst axle in the world, and abuse...
  18. Slobin3d

    TCP front coil conversion

    I've been talking with a buddy of mine who's been helping me with my car setups, he used to be pit crew for Mickey T back in the day, and he was explaining roll center and camber gain to me, All the cars I'd owned prior and scca'd had had stock suspension and weren't that adjustable. He was...
  19. Slobin3d

    Will Carb Spacer help?

    if your getting that hot, maybe you need to look into your cooling system too?
  20. Slobin3d

    8.8 rear end

    unless your running Huge power I wouldn't bother with a c clip kit, I would look for a 31 spline axle, I'm not 100% sure on the width needed but a late model 8.8 from an explorer should be 31s with disk brakes and 5x4.5 bolt pattern :nice: I need one for my cherokee:D
View older results
Top Bottom
Back
Forums
Menu