Search results

  1. Fastime331

    Leakdown at local speedshop = Possable ripoff and lies (LONG)

    .
  2. Fastime331

    Leakdown at local speedshop = Possable ripoff and lies (LONG)

  3. Fastime331

    Leakdown at local speedshop = Possable ripoff and lies (LONG)

    Forget about it...
  4. Fastime331

    Pro-M remote optomizer

    I have one and have yet to install it. Definitly worth it to buy! Especially if you already have a couple hudred wrapped up into an aftermarket mass air meter and want to swap injectors. OR if you have a blown application...
  5. Fastime331

    Oil on sparkplug threads, what's the culprit?

    Yea I've got Omega 7/16 stud mount adjustable rockers. I'm taking it to a local Speed shop to have them perform a leakdown first and if that passes (which I doubt) I was half tempted to buy an Autometer guage guage with a vaccum/boost guage to monitor when and why it creates the crankcase...
  6. Fastime331

    Oil on sparkplug threads, what's the culprit?

    Can mal adjusted rockers cause this buy any stretch?
  7. Fastime331

    Oil on sparkplug threads, what's the culprit?

    I am worried about that as well, I let a local machinest do the work. He has built many engines but does not specialize in Fords. Should have known better :(
  8. Fastime331

    Oil on sparkplug threads, what's the culprit?

    Good point I'll try that too
  9. Fastime331

    Oil on sparkplug threads, what's the culprit?

    Yes and then I re-replaced the rear main again because I thought it was somehow defective. I did have a valve cover breather but that diddn't work either Thanks for your help Mike, You have a wealth of helpful knowledge.
  10. Fastime331

    Oil on sparkplug threads, what's the culprit?

    Torqued down right? I have ARP eveything and studded. Now as far as torque, beside the intake manifold lower gasket allowing some residual oil in from the valley (unlikely) What about the PCV valve, If it is allowing oil to bypass how can this be stopped? and I don't think even a...
  11. Fastime331

    Oil on sparkplug threads, what's the culprit?

    Do you mean on the outside or inside of the valve cover? I can find any leaks on them at all. The whole engine is relatively new ie. 1 year @ 2500 miles. All gaskets are top of the line and new.
  12. Fastime331

    Oil on sparkplug threads, what's the culprit?

    No smoke from the exhaust at all... :shrug: My compression varied greatly fron 162-184 psi.
  13. Fastime331

    Oil on sparkplug threads, what's the culprit?

    I'm hoping that the oil on the plugs dosen't mean I have a serious problem. Under full throttle blasts oil gets forced out the front and rear main seals though :( I'm going to perform a compression check today, I'll let you know how it goes. Anyone want to post their compression #'s?
  14. Fastime331

    How do I hit 300rwhp?

    Did you take that thing to the track yet? I'm curious to know how it runs with those #'s!
  15. Fastime331

    Flaming river manual rack trade for stock...

    pump w/ pully and bracket plus 250.00 cash. Rack w/ tie rods is currently installed on my stang which is only stored inside and the rack is only one year old with 1500 miles and in perfect operating condition. PM or E-mail me, Chris
  16. Fastime331

    DO you ice your intake after runing at the track??????

    Put the ice in a garbage bag to eliminate leaks, works for me. 2 10ths usually.
  17. Fastime331

    AGR Rack & Pinion and Pump needed... Help please!

    Okay I just ordered pump # 809102 and rack # 712581 I'll let you know when I get it operational. could someone please post some pics of the stock pteering pump as it is installed on our cars 87-93. I have had the manual rack for a while now and can't recall if it had it's own bracket...
  18. Fastime331

    Making 325 RWHP...what is the max amount of N02 with my mods?

    Which kit were you using? I'm looking at the: NX 20922-10 kit ALL FORD EFI SINGLE NOZZLE SYSTEM WITH 10 LB. BOTTLE ( 35-50-75-100-150 HP ) -or- The new Edelbrock plate kit 150-300 hp. Who has the best prices?
  19. Fastime331

    Making 325 RWHP...what is the max amount of N02 with my mods?

    Okay I know the stock crank, rods and block are only good for so much. But... My mains are studded, I have ARP rod bolts, Forged pistons and balancing of the assembly. If you were me what would be the Max amount of Nitrous (wet kit) you would go with?
  20. Fastime331

    Car is bucking at cruise, any ideas?????

    It's in the closet, I have to send it back as defective....
Top Bottom
Back
Forums
Menu