Search results

  1. MachAzure

    PI Heads and intake

    Liberty Ford Parts Department: Randy Stinchcomb This guy is awesome and will get everything you need. For spring/summer they have a PI head swap kit for $1225 for everything you need. Modular Depot Link
  2. MachAzure

    4.6L transplanted into a Shelby Cobra 427 S/C

    How about a 5.4L from the lightning or f-150,expedition? Would have good torque, same hp as 4.6 SOHC and be very streetable. OR 5.4L DOHC from the navigator
  3. MachAzure

    speedometer correction. what is needed??

    You cannot get a speedometer gear with enough teeth to compensate for the 4.10 gear ratio on the t-45. THe highest possible speedo gear is a 23 tooth which compensates up to a 3.55 gear. To get the speedo accurate- I would get the Dallas Mustang speed cal...
  4. MachAzure

    Gas Mileage

    We have the exact same car and same problem! I too am seeing just about 140-175 miles per tank. WTF?? What octane are you running? BTW- I have 650 miles on mine.
  5. MachAzure

    Has anyone actually used the K40 Laser jammer

    Why don't you just drive the speed limit and obey traffic rules. Save the speed for the track. :nice:
  6. MachAzure

    4.6L transplanted into a Shelby Cobra 427 S/C

    For the price I would go with the 4.6 DOHC out of the mach. It has a forged crank-for the manual version. The rods/pistons however are still as weak as what is in the SOHC engines. A 427FE would be cool as well. Big cubic inches and big torque numbers unlike the 4.6. If cost has...
  7. MachAzure

    Chin Spoiler/Grill Delete Ordered (Install Q's)

    If you have to remove the pony for the grille delete you will need a special torx bit that has an open center (put there to make the pony harder to steal). Other than that, it should be fairly easy.
  8. MachAzure

    I found some thing, it may be of interest to you..

    Thanks :hail2: Added to my Favorites.
  9. MachAzure

    Removing Seats

    You should have 4 bolts for the passenger side seat and then you will need to disconnect the seat belt attachment from the seat. For the driver's you have 4 bolts and plug-ins if it is 6-way power.
  10. MachAzure

    is this a good deal ??

    Seems pretty good- Mustang Parts Specialties in GA sells thier PI engines for around 1800 with those miles or more.
  11. MachAzure

    cc plates

    I ordered mine for my 96 GT from Maximummotorsports.com I have seen them on EBay from time to time for cheaper.
  12. MachAzure

    Personnalized license plate

    How about 2FST4U 8URZO6 Z28EATR FAST2V BRNRUBR btw-I am thinking of 04MACH1 MACH ON 04 RCODE RATED R MACH ONE USA ICON
  13. MachAzure

    Automatic Tranny about to go...good news?

    It depends- how good are you on a stick? You can always learn-but I don't think doing a conversion is worth the hassle. Plus it will probably end up costing more. I would get it rebuilt by a reputable mustang shop and get them to add high performance clutches and updated parts from the...
  14. MachAzure

    PI heads

    If you don't mid used parts- EBay or the Stangnet Trader. Otherwise- modulardepot.com parts department Randy Stinchcomb $1225 for everything you need Mod Depot link
  15. MachAzure

    Help me beat my dad's Mach1!

    Yeah, the Mach is fast stock...but it can be beaten. Cheapest way would be to use like a 100-125 shot of nitrous. Or, you could get gears, suspension, cams, longtube headers, off-road mid-pipe, drag radials, port and polish you heads, etc. Or, you could always add boost :D
  16. MachAzure

    Progressive Springs vs. Linear for strip

    Most guys setting the suspension up for drag racing either go with Eibach Launch kit springs : Link OR stock fox body V8 rears cut 1-2 coils with Fox body 4 cylinder springs in the front. The Eibach's probably work better but I had the Fox body set up and it looked good and performed...
  17. MachAzure

    4.10's installed today!?!?

    I've got 4.10's in my automatic with a high-stall converter and see 3k rpms at about 70mph.
  18. MachAzure

    What to use for cleaning rims

    Yeah- Use Eagle 1 A to Z wheel cleaner. Works well but is mild enough not to hurt your high $$$$ rims.
  19. MachAzure

    DOHC swap?????

    The reason is because of the cost and hassle of getting all needed parts together to perform the swap. It is POSSIBLE... just easier to buy the whole 4V engine. You would need new heads, timing covers, exhaust manifolds, intake manifolds, throttle body, ECU, injectors, and more. In...
  20. MachAzure

    Help with Exhaust Fumes!

    On a cold day while sitting can you see smoke coming up from the hood? Also, are there any hissing noises that you can hear? BTW- if there are no leaks you could add this to the fuel to improve the smell: http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=2299&prmenbr=361
Top Bottom
Back
Forums
Menu