Search results

  1. M

    Looking for a set of bumpsticks guys

    We carry both VT and Comp. I love both companys. It really comes down to what you have/or want to do to the car. Feel free to pm or call me if you have any questions about any of the grinds. But let us know what you are planning on doing with the car that way we can point you in a better way...
  2. M

    Need help ASAP!

    I think that he will be a little happier with the t56 setup in the car. Good luck on the project and let us know if there is anything that we can help with on the tech side. Good luck
  3. M

    Need help, clutch, tranny, flywheel....

    Yeah. I would go ahead and get an cobra clutch 11". There are a couple of different companys out there that are carrying good clutchs. We are using a lot of Rams....(reasoning being they have an 1 year warranty on them and we can get them at a pretty good price). But some of the other ones...
  4. M

    Drag launch

    Depends on if you want the struts to be adjustable or not. If not most of my customers are running Lakewood 90/10's in their car's...If you do Want an adjustable strut that is setup for more drag racing...I would look at some QA1's or AFCO's.
  5. M

    4.6 to 5.4 Engine swap

    drew_shipley: There is a little bit more to it then that. Not much..but a little bit more. If you are going to reuse your stock intake then you need some intake adaptor plates. We have some getting made now. But Other than that if you are wanting to keep it n/a then I would recomend getting...
  6. M

    dyno near raleigh, nc?

    Check out Haywood Custom Speed. Tell him that Will at MM Performance Sent yall up there. Here is his number: 919-544-4774.
  7. M

    Performance Mods for 04 Cobra

    How much money do you want to spend? That will help us out with telling you what might be a good setup for you. Or better yet to say the better bang for the buck.
  8. M

    PI ENGINE SWAP HELP!

    I would use the 96 Gt Map. On the coil packs. You should be able to swap everything over to the same spots that they are on the 96-98 GT's. You can reuse the brakets, etc. If you have any questions feel free to pm me anytime. Good Luck with the project!
  9. M

    HP Performance TT kit

    They are a pretty good kit...We are dealers for them...If you have any questions feel free to call us or Pm me I will be more than glad to answer the questions for you. Sometimes its hard to get ahold of them. I think the only down fall to the company is the customer service, but other than...
  10. M

    LT Install: Need Install Tips & Lift

    24 pack of beer! LOL. Naw its not that bad. Just take your time and you will be fine. If you need anything feel free to PM me or call the shop. If you are able to drop the K-member that would make the install a lot faster and a lot less streesfull. We have an engine hoist that hold the...
  11. M

    Car meet Charlotte,NC; February Fling 2/18

    Yeah. That was probably us. We have been to that meet a couple of times. Each time got there a little late. LOL!
  12. M

    Heat Exchanger Leak? Need some help

    I havent heard of that happening yet. But it is possibly. If it is give me a shout tomorrow at the shop. I might have a 1 or 2 laying around that i can get rid of cheap...Hope that it isn't that though.
  13. M

    Car meet Charlotte,NC; February Fling 2/18

    We will try making it out! Been out of the shop for the past week and half so a little behind on work. We just got done having our first baby Girl!!!! But anyways...we will try to come out and bring some more stangs with us. We will probably bring Toxic 5.4's Car (96 GT with Lightning motor...
  14. M

    03 Cobra engine in a 97 GT?

    The swap is timley because of the wiring and what not. You can reuse your stock computer/Wiring Harness/Etc.. (Like Roger-4.6-96 said). The one that we did here in the shop had a cowl hood and tell you the truth I didn't even look to see if it would clear in a stock hood app. Not sure. The...
  15. M

    4.6 build questions

    Sweet numbers Built98GT. 97gtblue: If you are wanting to do a supercharger in the long run then go ahead and get the motor setup for the supercharger. The only thing is like tweekedgt said you will not make as much power N/A right now...cause the compression will be down a little bit to...
  16. M

    5.4 swap- parts needed?

    If you are getting an motor out of an explorer than it is more than likely an 4.6. You need to look for an Expedition or F150 or even an Van. I usually come across used ones all the time...so let me know if you want me to look for you. We have done many of these swaps. If you are wanting...
  17. M

    Is it possible to stuff and 03-04 cobra motor into a 99 gt

    Its not to bad. You can resuse your factory wiring harness/computer. Just have to re-due some of the wiring. You will need a couple of things aswell: Heat Exchanger, Brackets for Heat Exchanger, Intercooler pump, Intercooler water resivor, good clutch, and you will need to make some new...
  18. M

    TT dyno results

    Its kind of a sleeper, just has aftermarket rims, so you really cant tell til it hits boost
  19. M

    Internals Q

    Gearbanger 101 is absolutely right. If you are wanting to do the internals before you do the supercharger. That would be a good way to go. That way you have all the good's in the motor already and only thing you have to do is slap that sucker on and make some boost. We have some pretty kick...
  20. M

    Port and Polish?

    The 262's should be a good cam for your setup. They should pull good in your car. I would also recomend doing some Beehive springs while you were in there. and upgrading the valves aswell. We have done a couple of these heads on some blown cars and turned out pretty good. If you have any...
Top Bottom
Back
Forums
Menu