Search results

  1. D

    March or Steeda pulleys?

    i have the march pullies that are piggy back and they were very easy to install and no vibration. could not tell a diffrence in power but i got them b/c i ran out of bolt on's to buy. it was the last mod i done b/c in my opinion they dont produce much more power and thats the main reason i went...
  2. D

    CAI Heat Shield

    well i thought the same thing and ive actually thought of installing something between the shield and intake but i wasnt sure what to put there but ill look for some of that tape. like i said tho i got bored and thought i'd try it. it prob wont stay on long but atleast i can make one now :)...
  3. D

    CAI Heat Shield

    well the CAI was givin to me from a buddy but your right i would have bought the K&N if it was me.
  4. D

    CAI Heat Shield

    CAI Heat Shield Pics Inside!!! well I got bored and ive noticed how hot the Intake pipe got after driving the car, so I figured I would make a heat shield for it.Im not sure :shrug: if this will even work,just thought hell ill try it anyways.I still have some more to do on it, like make me a...
  5. D

    2000 cobra R wheel

    springs are Eibach Pro Kit. and yes the wheel has a chunk out of it about 1 1/2 inches, thats what you get for letting someone drive your car. they ran the wheel up on the corner where 2 curbs come together and took a good gash in it. still holds air with no leaks or anything but im bout to get...
  6. D

    2000 cobra R wheel

    mine 18" Y2K Cobra Wheels with 275/35-18 front and 295/35-18 rear.
  7. D

    Atlanta Chapter SVTOA Dyno Day

    is this dyno day only for SVT owners or open to all mustang owners.
  8. D

    Dyno Results

    well i believe im going to try out a Dyno Jet then ill post the diffrence in rwhp between the two dynos. b/c the guy at the dyno shop with the load bearing said it was approx. 17% less than what a dynojet reads and ive had others say do a formula with .82 or something and then ive had others say...
  9. D

    Dyno Results

    I bought the car about 2 months ago and had car dynoed couple weeks ago, 2002 Mustang GT 5spd, and it was dynoed on a Dyno Dynamics load bearing dyno and put down 246 rwhp. i know its going to be roughly 40 rwhp less than a dyno jet reads (or so i been told) but i was juss looking for peoples...
  10. D

    NX Incognito Nitrous System

    anyone know anything about the incognito hidden nitrous system from NX. all input appreciated.
  11. D

    rearend question

    well the car is a daily driver and i rarely go to the track but when i do and want to do some hard launching i dont want to worry about breaking something and the car is N/A and i dont plan on any big power adder except maybe nitrous someday. so if i put the 28 spline locker in it should be fine...
  12. D

    rearend question

    alright thanks. eaton was what i was looking into. id also like to know if i bought a 28 spline locker could it hold up to launhes on slicks from around 4000 rpms.
  13. D

    rearend question

    looking at installing locker. need input on which is best and will a locker for 28 spline axles be good enough or will it not hold up. all input appreciated
  14. D

    what 1/4 numbers with this setup?

    2002 Ford Mustang GT.....5spd....Not much time to go to track right now....so i'd like to hear what numbers people are pulling in the 1/4 and 1/8 with this setup...MAC CAI Fenderwell kit, Accufab 75mm TB, C&L Plenum, Hooker LT's, X-pipe, mac mufflers, and diablo predator, 4:10. please include if...
  15. D

    Dyno Results

    alright well let me know about the timing b/c id like to see what your running it at between 2k-4k and from 4k-7k on the predator.
  16. D

    Dyno Results

    so if the 17% decrease in rwhp is correct due to the load bearing....246.1 x 1.17= 287.9 then i should see around 287.9 on a dynojet. is this correct?
  17. D

    Dyno Results

    whats your timing set at?
  18. D

    Dyno Results

    What type of dyno did you dyno it on?
  19. D

    Dyno Results

    Results were from a Dyno Dynamics load bearing dyno. I was told the rwhp numbers would be about 17% less than on a DynoJet....does 17% sound correct.
  20. D

    Dyno Results

    2002 Mustang GT Mods: Accufab 75mm TB, C&L Plenum, MAC CAI Fenderwell Kit, Hooker LT, Diablo Predator, 4:10, U/D Pulleys.
Top Bottom
Back
Forums
Menu