Search results

  1. S

    UPR or not?

    If 'Made in China' isn't good enough, how about the fact that they don't have a single original product (last time I checked). They're just cheaper versions of products that many other companies have spent a lot of time and money on R&D. Do their products get the job done?? Sure they do, or...
  2. S

    Clutch/flywheel re-install. Two questions.

    :stupid: RTV is not an equivalent to threadlocker. I've never used anything but the the red loctite (271/272) and I also have never had any oil seep out around the bolts. I'm not sure RIO, but I think you meant the TOB is sealed. The pilot is an open center roller bearing :nice...
  3. S

    what happen

    and I don't ever do it...so please forgive a 'founding member' for not being familiar with the inner workings of the website/server :nice: I have no idea who takes care of it, but I'm awfully glad they do :hail2: :hail2: If it were on my shoulders to do it, this site probably would've...
  4. S

    what happen

    so if we can still post, do we also need to reregister??????? guess I only lost ~130 on my post count :flag:
  5. S

    K member question

    Just found out last night that he's changed his trip and he'll only be going as far as Roanoke, VA. Sorry Dude :(
  6. S

    Blue Mustang registry is a reality

    #49
  7. S

    Heater core pipe questions

    ECT sensor (engine coolant temperature). This sends the temperature to the computer.
  8. S

    K member question

    So long as you can get over to Belton to pick it up, make me an offer. Whatever it's worth for you to have, it's worth for me not to have it sitting around here.
  9. S

    Blue Mustang registry is a reality

    It's telling me that Atlantic Blue & Bright Atlantic Blue weren't available in 95. So where's Atlantic Blue Pearlcoat?
  10. S

    Axle removal help!!

    Spray it...and then spray it some more. I usually give it a little assistance with a small pin punch and some light tapping. Tap on the plastic, working your way full circle. I wouldn't recommend striking the pin. Mine worked fine when I removed them. If you break one, let me know and I can...
  11. S

    How do u do the math to figure out cam lift with aftermarket rockers?

    that's correct :nice:
  12. S

    Question on Upper and Lower intake

    the 1250 is a significantly larger port than the factory intake port. I'd look at port matching the intake ports once you have it apart. JMO
  13. S

    351 Guys check in here!

    hmmm....so it's possible to do 450ci in aluminum :nice: your car came from the factory without ABS?? I'm going to removing all the ABS hardware from mine before I get this little project finished.
  14. S

    What happens if you break your ECT sensor? Can I still drive my car?

    Yes. It'll be fine 'til you can get to NAPA.
  15. S

    K member question

    Yeah...it's in my 95 right now. I've got an AJE chromoly to put in, but I've just been too lazy to swap it in. I could get the stock one out in the next couple of days. The best I can do for delivery is Belton, SC. If you can drive over there to pick it up, I'll get it out and get it ready...
  16. S

    351 Guys check in here!

    I don't know what size turbo I'll need. I haven't even started any research yet. I just meant small in terms of boost...12-18psi on pump gas. I've got to get my 408 in and running before I put much effort into a turbo setup. What kind of aluminum block are you looking at? Is 427 the max...
  17. S

    Help me pick an intake......

    it could be there with tires and a driver...
  18. S

    351 Guys check in here!

    I agree with Joe. Until you go for the boost & the juice. Then you'd better a have a Dart or World block. FYI: The new World block is capable of 470ci :worship: :hail2: :worship: :hail2: :worship: :hail2: :worship: . That's what I want for my next build ( 450ci+ with a small turbo :nice: )...
  19. S

    K member question

    I've got one you can have really cheap. Are you anywhere near Anderson? or somewhere along the way down 77? Got somebody coming down that way next weekend, but I'm not sure what they'll be driving. Probably will depend a lot on the weather.
  20. S

    Are these cheaper anywhere else?

    Those are VERY nice :nice: Is that price for both? Best I found them for last summer was $229.
Top Bottom
Back
Forums
Menu