Search results

  1. Strype

    Need Help With A Code 18

    I just had a code 18, 85, 33, 41 and 91. Changed the TFI and no more CEL. Exhaust no longer stinks. Runs great now.
  2. Strype

    Hanging At 2,000 Rpm

    Okay I'll try that. Thanks
  3. Strype

    Hanging At 2,000 Rpm

    B303, GT40X, 5 speed Hey guys this car is still hanging at 2,000 RPM for 10 seconds when out of gear then returns to idle. Every now and then it searches to 1500. Here's what's been done recently - TFI Module, Plugs, Cap, Rotor button, Idle Air Bypass, TPS, Coolant Temp Sensor. These are all...
  4. Strype

    Electrical Not Charging As Usual...will Upgrade Help?

    Good deal.
  5. Strype

    Ticking Valve Train

    Here is the car just for reference: http://www.stangnet.com/mustang-forums/threads/wierd-5-0.869155/#post-8736651 I remember guys from long ago telling me that GT40 heads will work with stock 5.0 pushrods, but they aren't exactly the correct length and they'll tick. I think this is exactly...
  6. Strype

    Ticking Valve Train

    Call me if you need some help. I'm working on my window.
  7. Strype

    Electrical Not Charging As Usual...will Upgrade Help?

    And what a PAIN IN THE ____ to get it off of the alternator if it is.
  8. Strype

    Electrical Not Charging As Usual...will Upgrade Help?

    Are you positive there's no underdrive pulleys? Most alternators come with a gold colored pulley that I've seen. I had bad issues too until I took the one off of the alternator. The one on the crank pulley is still on there and I have no problems.
  9. Strype

    Gears

    Did you do this...
  10. Strype

    Fuel Fuel Gauge Not Working, What To Do?

    Try this: http://www.stangnet.com/mustang-forums/threads/fuel-gauge-replacement-stock.868786/#post-8731078
  11. Strype

    Trying To Learn Suspension ..

    The real way to understand it is to replace the stuff. That's how I learned. Start a thread, take some pictures, and let us guide you through it. For instance (paraphrasing) - Spring change on the front. If you look under that front tire well you'll see the A arm. That is all that's holding...
  12. Strype

    Fuel Fuel Gauge Not Working, What To Do?

    Problem might be in the tank.
  13. Strype

    Temp Gage Reading For 91 Fox

    You can also use blue RTV sealant on both sides of the gasket. Fishing line... Smart.
  14. Strype

    How Do I Roll Power Window Up?

    I took out and took apart both switches and they seem functionally fine except for a bit of corrosion on one. I didn't get a chance to reinstall and try them again after cleaning.
  15. Strype

    How Do I Roll Power Window Up?

    I think my switch is bad. The passenger window is stuck down. Can I jumper that switch? I'm waiting on the new one to get here. And the motor has been fine, all the sudden completely dead from both sides. The driver's side works.
  16. Strype

    Temp Gage Reading For 91 Fox

    Been there several times. Annoying to say the least. Personally I'd check these first: Thermostat. or Air in the line. 1) Replace that darn radiator cap - Could be letting air in. 2) Change the thermostat or throw the one you have in boiling water and look for it to pop open. Another way...
  17. Strype

    Muffler And Cat Upgrade

    I can tell you right now what that exhaust smell is. When I put the TFI module on the smell dropped down to nothing. Timing timing timing.
  18. Strype

    Codes - Mustang Says...

    My neighbor will be installing the 3.73's soon. Vroom vroom. Now if I could just get teh passenger window to roll up. :scratch:
  19. Strype

    Codes - Mustang Says...

    Deputy Doofy Gilmore? Vacuuming? No one? *crickets*
  20. Strype

    Codes - Mustang Says...

    NOT WHILE I'm VACUUMING!!!
Top Bottom
Back
Forums
Menu