Search results

  1. Strype

    Codes - Mustang Says...

    I'm gonna go sit in it naked now. Don't judge! Thank you sir you was right on
  2. Strype

    Codes - Mustang Says...

    FIXED. Thank you Jesus, Mr. Richker, Mr. Gafford and Mr. 5L5. 1) Cleaned the oil off the #2 and #3 plugs *helped* 2) Because of the oil in the intake and vacuum lines I bypassed PCV. Followed this: http://mustangpartstech.com/Engine/BreathersandPCVDelete.html *helped* 3) Because of the...
  3. Strype

    Codes - Mustang Says...

    I will try capping that hose off but last time I did I got a lot of blow by. If that doesn't work that intake is going to have to come off. This is ridiculous.
  4. Strype

    Bbk Ssi Manifold V. Cobra Intake

    And as of yesterday I found oil all in the intake and all over my spark plugs. *wooooooossssaaaaaaahhh*
  5. Strype

    Codes - Mustang Says...

    That's a bit too much vacuum. And it's enough to make air his thru the gasket of the phenolic spacer. What gives?
  6. Strype

    Codes - Mustang Says...

    Spark Plug mystery solved! She's pulling oil from the valve cover to throttle body hose, through the intake, and what two cylinders are first to get the oil in the runners? Numbers 2 and 3. Picture is upside down. Stoopid iPhone.
  7. Strype

    Codes - Mustang Says...

    Yep.
  8. Strype

    Bbk Ssi Manifold V. Cobra Intake

    And this one time at band camp, I was in my garage letting my car warm up, and I smelled gas, and I looked, and it was leaking from the center tube onto my lower intake - off the back of the motor - onto the exhaust. It's a great intake as long as you don't use it for an intake. I've been...
  9. Strype

    Bbk Ssi Manifold V. Cobra Intake

    I have a BBK SSI. And yes, he was BS'n you. He couldn't keep the crossfire fuel delivery from leaking. I had the same issue. I ended up having to run braided line out of the back and around to the other rail. It's GREAT! See below...
  10. Strype

    Codes - Mustang Says...

    Thanks dude. I was just talking to my friend who helped me build the motor. We are thinking the same thing. Plan of action: 1) Take that _______ _______ ____ __ ____ BBK SSI intake off and bury it in the back yard. I think the pheolic spacer is leaking. Put the old Explorer intake I have lying...
  11. Strype

    Codes - Mustang Says...

    A few things... 1) When I spray carb cleaner where the upper intake meets the lower, the engine revs. 2) Both #2 and #3 plugs are wet with a kind of varnish - They've done this before, were replaced, and wet again. 3) I did a compression check a year or so ago and everything was reading 120...
  12. Strype

    Codes - Mustang Says...

    2 wet plugs right next to each other. I think bent valves or head gasket leak. What say you?
  13. Strype

    Codes - Mustang Says...

    Haven't tried. Will tomorrow. My buddy thinks it's old gas given the color but why on 2 injectors? And I swear that these same 2 were wet before. Same 2. I WILL FIGURE THIS OUT!!!!!!! Brand new taylor wires, plugs, cap, button... Those injectors are used.
  14. Strype

    Codes - Mustang Says...

    Plug 3 as well... Kids and wife say gas smell. Me? I'm not so sure. Could be antifreeze or oil. Oil was JUST changed. Sometimes the dipstick smells of gas. Something is awry. Plug 1 is ok and dry. I hope it isn't a head gasket. And the fuel pressure has been holding better than ever.
  15. Strype

    Codes - Mustang Says...

    #2 Cylinder. Still wet after 2 hours. Gas. Soooo... Stuck injector?
  16. Strype

    Noob Cam Question

    The self test said cyl 2 is out of whack so I'll chase that down first. Put it in dot to dot. We've already been 180 out but I'll check again. Hci job gt40x heads
  17. Strype

    Codes - Mustang Says...

    I changed the ECT just in case, changed dizzy cap and rotor button, set the TPS to .98. I did the diagnostic again. This time I got results. :( KOEO 11 KOER 21 ECT 41 Passenger O2 Lean (why? 190lph pump and 24lb injectors!) 91 Driver O2 Lean 33 No EGR (duh) 18 SPOut circuit open, possible...
  18. Strype

    Codes - Mustang Says...

    :nice:
  19. Strype

    Codes - Mustang Says...

    Bought this a couple of years ago but it has a vacuum advance... Any way to make it work? Or should I Craigslist it?
  20. Strype

    Codes - Mustang Says...

    Well that doesn't help... I may not be God's gift to cars but, wtf. Really.
Top Bottom
Back
Forums
Menu