Search results

  1. Strype

    Noob Cam Question

    I have no shame... So what should a b303 feel like? What should my timing be set at? I've read advanced all the way, I've read stock timing. It shakes the whole frikin car and backfires until warm at 14 degrees. I've never had a cammed car before. Should it shake enough to see the motor...
  2. Strype

    Codes - Mustang Says...

    NICE diagram! Right click save. I've actually replaced one of those before but I don't remember what car or what it was doing. I'm going to start keeping a journal. Let's not get into the beeping. I get a nervous tick thinking about it. Well I didn't get to run the bloody codes. Kids are...
  3. Strype

    Codes - Mustang Says...

    OK! I got the little flashes at the beginning this time. Now I know what that beeping is going down the road. It's irratic and odd. My CEL must be hosed. Here's what I got just now KOEO... 85 85 14 14 Then the beeping started and nothing else from the CEL. So I will have to use the volt...
  4. Strype

    Codes - Mustang Says...

    :lol: As soon as the stupid combines get done across the street. The dust is unbearable! Then we gotta take the boys to a kid's carnival.
  5. Strype

    Codes - Mustang Says...

    Found it! Looks old but it's connected
  6. Strype

    Codes - Mustang Says...

    You know it's awfully strange that when running it didn't repeat codes. Here's what I have written down while running. May you guys can make sense of it: KOEO - 85 1 4 4 Then I turned it on Running - 4 2 1 *engine idled up* 9 *pause* 3 3 1 8 2 3 *engine idled up* 9 *pause* 3 3 1 7 4 4 2...
  7. Strype

    Codes - Mustang Says...

    Okay thanks j I'll check that out What's a "major" issue... :( ECT- I thought it was to the gauge. What heater pipe? We took a/c off to build motor. Stoopid me.
  8. Strype

    Buying A Mustang

    troof.
  9. Strype

    Codes - Mustang Says...

    If the 94's ever grew on me I'd have them surgically removed. :p When we were building this car, we had a rod that was too long, which is worse than a short one you can shim. We couldn't do crap with it so I traded out with my friend for a slightly shorter one than the rest. I am BETTING that...
  10. Strype

    Codes - Mustang Says...

    The PIP doesn't make sense. The car would die, not buck while cold. Hmmm
  11. Strype

    Codes - Mustang Says...

    My eyes stayed glued to it. Second time I've done it. No wierd codes starting out. Also, I read somewhere that after 1991 the cars all went to 3 digit codes? It was the last 1993 coupe on the lot when my friend bought it. Sitting all alone surrounded by ugly 94's. Bless it. I'll try again...
  12. Strype

    Codes - Mustang Says...

    I'm going with 14 - Profile Ignition Pickup Circuit Failure (CM) Dizzy indeed. Bless you sir. Bless you.
  13. Strype

    Codes - Mustang Says...

    Drat that blasted dizzy :fuss: Tomorrow I will replace it for the 3rd time. I need to buy a nice one instead of relying on autozone. Code 4? Dunno here's what she said- 85 1 4 4 Then I turned it on and got the 8 cyl 4
  14. Strype

    Dreading Coil Spring Replacement

    I said I was rude!!! :fuss: Well I got a flat tire and a crappy running motor anyway so teh springs will have to waitz. Sorry about teh rude comments. I kinda found out my contract was gone at work in a month and hit it pretty hard for a couple of days. My apologies. Thanks for the help guys.
  15. Strype

    Dreading Coil Spring Replacement

    :jaw: Someone got teh drunk and haxxored ma accountz
  16. Strype

    Codes - Mustang Says...

    Car runs like crap until warm. Battery was disconnected but I plugged back up and ran the codes anyway... I have just replaced the IAB and TPS. ***UPDATED*** I changed the ECT just in case, changed dizzy cap and rotor button, set the TPS to .98. I did the diagnostic again. This time I got...
  17. Strype

    Sluggish Starting

    I'm going through the check list little by little. On a hunch I checked the timing that my neighbor set... It was at 20! Needless to say it doesn't pop out of the intake or start crappy now. I set it to about 14, and will probably drop it to 12 tomorrow. It didn't like anything less than 10 but...
  18. Strype

    Won't Start

    :lol: I've seen that happen
  19. Strype

    Dreading Coil Spring Replacement

    insulting
  20. Strype

    Dreading Coil Spring Replacement

    scandalous
Top Bottom
Back
Forums
Menu