Search results

  1. blown65

    no new C4 torque converters available?

    Till it dies in a year and your back to square one.
  2. blown65

    A few pics from Kool April Nights

    Medford Cruise Home | Classic Car Show | Medford Oregon Medford Cruise Calendar | Classic Car Show | Medford Oregon
  3. blown65

    no new C4 torque converters available?

    I did one AAMCO trans and it will forever be the last. You can get a PA StreetSmart deal from Summit for less than that with everything and a lifetime warranty. Performance Automatic PASS26103 - Performance Automatic Street Smart Transmission Systems - Overview - SummitRacing.com
  4. blown65

    A few pics from Kool April Nights

    Nice, hopefully next year I can go to this. This show and our Medford Cruise is the two shows I love participating at. Been quite a few yrs since I've been to Reddings show though.
  5. blown65

    Input on 347 combo...

    High 12's vs low 12's. Not really something your going to notice on the street IMO. I would say his car is more a mid 12's car, some of it is the slow shifting that hurts his ET. Kinda like when I drive our Pantera I run 11.60's-11.70's. Put my granny shifting dad in it and its...
  6. blown65

    Input on 347 combo...

    Local guy here has a similar buildup. Not sure on the camshaft but he went nigh 12's with his in 3000' air. Those heads as stock aren't the best though.
  7. blown65

    Boss 302 Blower. What would you do?

    We just got done doing my cousins motor with the cleveland heads and custom FPA headers. Had to notch the towers to get things to fit. Even then its F'n tight. BDS will make a blower for anything, its just your going to be running a 6-71. I really don't think your going to find a cleveland...
  8. blown65

    Boss 302 Blower. What would you do?

    Only person that I could think that would have something or get you what you need is Blower Drive Service in California. They did my kit and intake years back. The clev heads will be the hangup over stuff like that B&M/Holley/Wieand blower posted above...
  9. blown65

    MSD 7520

    Digital 7, used on season. Changing to a programmable box. 400.00 Shipped and paypal. Digital-7 Plus Ignition Control - 7520
  10. blown65

    Should I use Tri-Y Headers on my 347?

    X2
  11. blown65

    620 coil spring question

    Man, 1 coil from those has to be quite a bit of drop I'd think. Mine were stock with nothing cut and sat pretty good IMO. I would personally only cut a 1/4 coil at a time if it were me.
  12. blown65

    Should I use Tri-Y Headers on my 347?

    This is what I ran. I have no idea between mid and full length how it would stack up. I cant remember if it was hooker or hedman headers though but pretty sure it was hooker. Hooker Headers 6111-1HKR - Hooker Super Competition Headers - Overview - SummitRacing.com 1 5/8" LT headers.
  13. blown65

    Should I use Tri-Y Headers on my 347?

    LOL, sorry. I have zero experience with the Tri-Y's. I believe they are supposed to give more low end tq. Maybe someone else can chime in on the 1 5/8 4-1 header VS a 1 5/8" TRI-Y header. I thought you wrote that they were 1 1/2" where I would say no to that.
  14. blown65

    Should I use Tri-Y Headers on my 347?

    I don't have a good answer there for ya. I would think you would give up some HP but probably gain some low end TQ. Personally I'd just go with the 1 5/8" deal.
  15. blown65

    Should I use Tri-Y Headers on my 347?

    If you look at the pictures of a tri-y vs 4-1 its pretty simple to see the difference in them. Just for a point of reference for you, I went from 1 5/8" headers to 1 3/4" headers. Same basic length on the tubes, 4-1 headers. Gained 0 at the track. This was on a 347 making 535hp flywheel...
  16. blown65

    Should I use Tri-Y Headers on my 347?

    1 1/2 is awefully small. 1 5/8" is common on LT headers and Accufab sells some 1 3/4" headers. 1 7/8" will have to be a totally custom deal and super tight in a 65 with stock front suspension parts.
  17. blown65

    H-pipe or X-pipe with Tri-Y's

    Here is the xpipe alternative. dumped with those little mufflers = loud. lol
  18. blown65

    In car cam change question

    We have one in our street rod pickup and those damn things are noisy as hell. Manual brakes aren't all that bad, its all I've had on my car for a good 25 years. LOL
  19. blown65

    Wheel choices/ show your wheels

    Nice 66runt, I like those wheels. Here is with Billet Specialties wheels 15x8 and 15x3.5 Greg Weld 15x8 and 15x3.5's
  20. blown65

    Wheel choices/ show your wheels

    17x9.5 with 5" bs on the rear. 16x7 up front. Just a little massaging on the back side and mine is still enough it doesn't rub on the outside. 275.40.17's
Top Bottom
Back
Forums
Menu