Search results

  1. M

    oil pump shaft

    Is there a trick to keeping this straight up and down when installing the distributor? The shaft falls to one side and then doesn't let the distriburtor slide over the top. Thanks in advance.
  2. M

    heater hose routing

    Okay, I am building a carb setup up from scratch. Can someone tell me which heater hose goes where. I have the different size fittings coming from the heater core. Which goes to the intake and which to the H20 pump? Thanks in advance.
  3. M

    electric water pump ...question

    Here is what I got out of the CSR Performance folks. "plumb into the other hole on the bottom of the pump. its 3/4NPT" There are two holes on each side of the bottom to give you the option to route your lower rad hose to either side. I totally forgot about the side I had plugged. Hope...
  4. M

    BBK H-pipe and O2 sensors

    Yes, I'm going carbuerated. Maybe I'll see if I can get anything out of BBK.
  5. M

    BBK H-pipe and O2 sensors

    I have installed the new H-pipe but don't plan on hooking up the sensors. Do I just plug the holes? If so, does anyone know what size the holes are?
  6. M

    351w stock harmonic balancer problem

    I am putting a 351W in my fox right now and I needed to replace the stock harmonic balancer because it was 3 hole and my new March pulley kit required a four hole damper. I ordered one through Summit (SUM-163289 DAMPER OEM 289-351) for $68. It worked great with the m-8510-b351 spacer you...
  7. M

    Which cooler line is the return on the AOD?

    I reactivated this old thread. Does anyone think that there would be a problem with running rubber for the AOD cooler lines? Should 3/8 do the trick?
  8. M

    Seattle area Stangerz

    Thanks man. All over it.
  9. M

    Seattle area Stangerz

    Can anyone recommend a good junk yard for looking for Fox Mustang parts? I need a wiring harness for the lights on a 87 LX.
  10. M

    Wire routing for 351W

    Does anyone have a picture of how they have routed their spark plug wires to prevent cross-firing?
  11. M

    Where is the standard spot to ground the battery too?

    thanks for the quick feedback. 88Stang331 I'm glad you're keeping it loose.
  12. M

    Where is the standard spot to ground the battery too?

    I am building up from an empty engine compartment and don't need any future electrical problems due to bad grounding.
  13. M

    Fuel pressure gauge

    I have a Mallory 4309 regulator. It has 3 outlets and a return. Of the 3, I have one for the feed from the fuel pump and one supply to the carb. Can I use the last outlet for a fuel pressure gauge or do I need to put it inline between the FPR and carb?
  14. M

    building engine from ground up... need assistance

    Come on Carb guys... does anyone that has switched to carb setup have a picture of thier seutp or know of an aftermarket bracket to use for the throttle and tv cable? Any assistance is appreciated.
  15. M

    electric water pump ...question

    Thanks for the picture. I bought a CSI-900C and the only water outlet is to the lower radiator. I was just trying to figure out how to route the lines to the heater core on the firewall.
  16. M

    electric water pump ...question

    Where do you route the hoses to your heater core if you go with an electric water pump? Pictures if you have them.
  17. M

    building engine from ground up... need assistance

    All - I am putting a carb'd 351W in an 87 LX with an AOD, I don't have a throttle cable or TV cable. Does anyone have experience with where I can find the right parts and maybe pics of how they have set this up. Thanks in advance.
View older results
Top Bottom
Back
Forums
Menu