Search results

  1. doc4444

    Mustang v6 engine smell when I floor it

    02v6auto: Can't tell ya about the smell......but look at your rear calipers and verify that one of your pistons is not locked in the open or closed position.
  2. doc4444

    took a couple pictures

    VERY nice looking car. I disagree about the Cobra center caps. There are times to be a purist (case in point the Stang with euro tail lights -Hell NO!) But center caps? They often ship with the wheels, and they compliment the vehicle. Good job on a beautiful ride.
  3. doc4444

    My most recent project:

    VERY NICE!!! How is the ride with the Bilsteins? I wanted to get those but cheaped out and got Mach One shocks and struts, along with some "C" springs, BIG mistake. Don't get me wrong they're not bad just not as good as I wanted. Let us know how your new ride feels, carve any corners...
  4. doc4444

    Hyundai Mustang?

    I don't know about you guys but my interest if piqued. I wouldn't buy it for speed, but I'd do ANYTHING to get rid of my "fantastic plastic" interior. LOL
  5. doc4444

    internals to a baddazz engine???

    Jake: If memory serves me correctly, the last post I saw on you was that you were deploying to the Middle East. Barring my faulty mind. WELCOME BACK!!! And thank you for what you do.
  6. doc4444

    3.73 OR 4.10????????

    Yes, acceleration is quicker. Yes, top end is decreased slightly. Yes, you will enjoy the new mod. No you will not lose mpg (some actually gain 1-2 per gallon). Hope that helps.
  7. doc4444

    LIQUID HElp....

    I use Amsoil and at www.amsoil.com it has an application guide that tells you all of the fluid capacities, and grades of the fluids that need to be placed in your vehicle. Good Luck.
  8. doc4444

    Mustang ad

    You have to have more than 4 posts to do so, I believe. Unfortunately I can't remember how many you are supposed to have. Sorry.
  9. doc4444

    I hope you can help

    When was the last time you changed your plug wires? A similar thing happened to my wifes '98 and almost $3000.00 later and a rebuilt transmission we found out it was just the friggin wires! Good luck.
  10. doc4444

    Ball Joint came out of control arm while driving!! Help Please!!

    Also, if you want thorough in depth instructions, go the MM's website. They have how to's for most of their products.
  11. doc4444

    headlight replacement

    No you don't have to take off the bumper. The headlight is a self contained unit. Once you clear the aforementioned clips it should just slide out, although if you have had them on for awhile you might have to rock it back and forth a little to loosen it. If I recall correctly there are two...
  12. doc4444

    headlight replacement

    I agree with gunmetal5.0. Get a Haynes, or Chilton's. The only "tricky" thing about the headlights is on the 3 clips (for lack of a better word) they have tiny prongs that must be depressed before you can remove the headlight. That is the ONLY really tricky thing about the headlight removal.
  13. doc4444

    what the devil is a founding member?

    Founding member! Woohoo!
  14. doc4444

    Say you work in a bad part of town... and people are stealing your gas...

    Get a trunk monkey!!!
  15. doc4444

    missfiring/stumbling on a 3.8L mustang

    crm318: Follow this thread for all you will ever need to know on sea foam: http://forums.stangnet.com/showthread.php?t=561567&highlight=seafoam AP1995V6: Do you have any autozone's where you live, Schuck's? If you go to these parts stores (I know there are many others too) they will pull...
  16. doc4444

    missfiring/stumbling on a 3.8L mustang

    Definately do a diagnostic to pull any codes firing. Also check your fuel filter, spark plugs, wires, oil, transmission fluids, and it wouldn't hurt to sea foam your car too. Just did mine and it runs GREAT now. Doc
  17. doc4444

    T-LOK

    DO NOT do the work yourself. It is VERY intricate and needs special tools for the calibration/alignment if I remember correctly. Have a shop do it, that way if they end up installing them wrong and damage your ride, THEY HAVE TO PAY FOR IT! : ) Also I recommend you change your gears WITH the...
  18. doc4444

    Sea foamin v6

    Okay, now can anyone tell me how to find the PCV hose or the brake booster hose on a '98 V-6 please. Pics would be nice. My engine bay is stock except for a MAC CAI, and pullies. Thank you in advance. EDIT: Ended up using the brake booster instead of the PCV: Got some white smoke, not a...
  19. doc4444

    Seafoam is teh *****!

    Would someone please be so kind as to post where the PCV point is on a 94-98 Single Port v-6 engine. I REALLY want to do this but for the life of me can't find where this vacuum line is. Thank you. Doc
  20. doc4444

    Something Rattling While Accelerating!

    Also check (believe it or not) your brakes! I had the same thing and it turned out to be something hosed with my brakes!
Top Bottom
Back
Forums
Menu