Search results

  1. S

    (someone or something ruined my Mustang stories)Highway+Deer+notmycar=funny

    damage to the stang I hit a hawk doing 90 on 495 in MA one summer. Just enough room between the front bumper and the emblem to let it slip through and hit the condensor. It didnt crack it, but let me tell you....it was a mess. I picked feathers out of it for a week.
  2. S

    are 3 1/2 tips to big

    3.5 tips Wow its been a while since I posted :D IMHO either tip LOOKS great. And since they are just the tips you would not have to worry about pressure issues as much. However, if you wanted everything on the car to make functional sense, usually the only time a 3inch or above exhaust is...
  3. S

    $169 3 1/2 in Summit Radiator FITS our cars!!

    I just installed one last weekend. Works AWESOME! I was running like 225* before. No im running about 195*
  4. S

    New radiator?

    Click, to be honest. I ordered the summit brackets and didnt even use them. The radiator fit so snugly That I didnt even fab brackets. The Overflow bottle holds the radiator so tight that i cant budge the radiator once its on there. The radiator is so Awesome. If you have any other questions...
  5. S

    New radiator?

    I just installed a Summit Rad yesterday. It only took minimal Fabrication. And it works great here in the FL +90* heat :nice:
  6. S

    How can I adjust my idle?

    you can also shift the TPS to change idle speed. Its tricky but I know that there have been posts about it.
  7. S

    Chip Qs?

    I just got one of the new revolution chips from diablo sport. I found it on ebay for 40.00 :D I then had Wolf Performance burn me a program on it from a friend who made me a twEECer file. Well worth the investment. Having advanced timing caused all kinds of drivability issues for me. Now that...
  8. S

    Is 220* for water Temp to hot?

    What should I be running at. Thanx in advance.
  9. S

    high temp and AC runoff

    sounds good. I will install one and see how it goes. thanx
  10. S

    high temp and AC runoff

    So i installed the new temp sending unit and it made no difference :bang: What to do? Thank you all for all of your help so far :nice:
  11. S

    tensioner out of range?

    what about waves or ripples in the tensioner pulley?
  12. S

    tensioner out of range?

    if its just over the marks? ..............anyone?
  13. S

    tensioner out of range?

    So I have been having some high temp issues. I replaced the sender and nada. I purged for air bubbles and that didnt really help either. I just looked at my tensioner and the marking piece is slightly out of range. I bought the belt a month ago. replace the belt or tensioner? Any suggestions...
  14. S

    .25ohm reading on temp. sending unit?

    found it. :D
  15. S

    high temp and AC runoff

    just replaced the sending unit. we will see how she does
  16. S

    .25ohm reading on temp. sending unit?

    I cant seem to find a part number for the unit. Autozone or advance seem to have the sensor but not the sending unit. Do I have to buy an aftermarket guage with a new sending unit?
  17. S

    .25ohm reading on temp. sending unit?

    So I checked my Ohm on the sending unit and it reads .25 when my manual says it should read .74. Should I replace the sending unit? Thanx in advance. P.S. in another thread we have been discussing how I have been having a hight temp issue.
  18. S

    high temp and AC runoff

    So I checked my Ohm on the sending unit and it reads .25 when my manual says it should read .74. Should I replace the sending unit? Thanx in advance.
  19. S

    high temp and AC runoff

    Nick, I checked my fan fuse and its fine. it seems to run normally and makes more air when the ac is turned on. where is my temp sender and what is the exact part I would have to replace? it takes like 30 min. for the car to start to run real hot. thoughts? suggestions?
  20. S

    AC question?

    I dont know if this answers your question but, my car had intermitent ac for a while. turned out it was a faulty ground. check it out. it may be an easy fix.
Top Bottom
Back
Forums
Menu