Search results

  1. R

    97 cobra Looking for 12s

    My buddy installed 3.73's in his 97 cobra and those gears really woke his car up as well. He likes to cruise in it and take an occasional ride to the track. He wanted reasonable rpms on the highway, so he went with 3.73's. You'll here people say 3.73's arent a big enough jump and blah blah blah...
  2. R

    97 cobra Looking for 12s

    a 96-98 cobra running better than 13.8-13.9 stock is like an LS1 that runs 12's stock up here (sea level). It doesnt happen that often...but it does from what I hear. I have never seen it. Most people run low 14's @ 100-101mph stock with a 96-98 cobra. You need the following: 4.10's or...
  3. R

    Mach 1 Stock Mach 1 Vs stock LS1

    Very true. I saw a bonestock 2002 z28 auto run 13.22 @ 104. Not too many manual tranny guys can get those times with such a low mph on street tires. M6's trap more, but the autos typically pull out better ET's.
  4. R

    04 Cobra or 04 GTO?

    Umm..with a good driver the gto wont have problems with the mach 1. They will actually be very similar. Nobody will be getting smoked. Most likely one or the other will pull within 1 length by the end of quarter. With that said, wait for the 05 GTO with the LS2 (400hp/400lb-ft). I would take...
  5. R

    Mach 1 Stock Mach 1 Vs stock LS1

    Tell your friend to learn how to drive. Either that or you consider winning by a car length "putting a hurting on him". You all know the LS1 is powerful and fast and the slow ones are typically slow because of the driver...
  6. R

    Car Lovers inside

    Thanks bro. Your are right about the S Trim being small. The only good thing is it spools quick. By 4700rpm I am at 14psi. I will upgrade later, but for now it is the blower I had in my garage. I need to allocate cash to other parts (cage, clutch, etc.). I'll keep ya posted.
  7. R

    Car Lovers inside

    Thanks dude. I dunno, the stock 10 bolt is gonna hold me back on the launch and will probably blow up as soon as I mash the gas. I would say babying it off the line, 11.5 @ 133mph or so. It also depends if I have to shift into 5th (which I think i will).
  8. R

    Car Lovers inside

    I have been on this site for awhile and know there are fbody guys here and some mustang guys that just like cars (despite the brand). I thought I would post this. I am about to start my 383 LT1 buildup with forged internals. I am going to be running my S Trim with 14-15psi and alky kit. I am...
  9. R

    What would it take to beat a corvette?

    Unless its a bonestock ZO6... Just thought I'd throw that in since you guys were straying from the original question :)
  10. R

    horsepower TV is featuring a 04 cobra

    Is it me or was that the lamest show ever! How do gain under 10hp when upping the boost by 4psi! Gaining 40hp with a hypertech is bogus too. Something is wrong there. I dunno. I would expect the 40hp to be from the 4psi pulley, and less then 10hp from the programmer. Does anyone else think...
  11. R

    What would it take to beat a corvette?

    My buddy has a 97 cobra with T/A, pullies, CAI, LT's, hi flow cat pipe, catback and 3.73's (he dynoed 287rwhp) and he ran even with a stock C5 until he missed 3rd gear. He said the vette was starting to creep away toward the ned of 2nd. No doubt 3rd would have been uglier. Depends on driver and...
  12. R

    SVT Cobra vs. 2004 srt-10

    Lots of bad viper drivers out there...
  13. R

    95Z28 M6 for sale in MA

    New price: 10,000 or 11,500 (and I throw in a used vortech S trim in a box).
  14. R

    what is SSOM ?

    Sunset orange metallic? Thats an fbody color.
  15. R

    95Z28 M6 for sale in MA

    :banana: I figured I'd post in here because most likely the sale would be a local one. If you decide you finally want to go fast, let me know I may still have my LT1 for sale :D :stick: j/k
  16. R

    95Z28 M6 for sale in MA

    1995 Camaro Z28 LT1 6 speed with 55,000 mile. LE Ported LT1 Heads 2.00”/1.56” Manley SS Race Flo Valves(Comp cam springs, retainers, etc.) Comp Cam XE230/236 114LSA .544”/.556” cam Comp Cam 1.6 Roller Rockers Accel 48lb/hr injectors Walbro 255lph in tank low pressure pump BBK...
  17. R

    Mach 1 Stock Mach 1 Vs stock LS1

    There is no opti spark in an LS1 because they have coil packs, only in an LT1. In the LT1 all you do is pull the crank balancer off and the water pump to remove the opti. I love it when people dont know what they are talking about.
  18. R

    2004 Cobra vs. 2002 Z06

    I also saw a 633rwhp @ 130mph on that list.
  19. R

    2004 Cobra vs. 2002 Z06

    Ligenfelter SC bolts on to a stock C5 or ZO6 and will produce 470-550rwhp depending on which vehicle. It will only take a ZO6 500rwhp to trap close to 130mph. What does a kenbelle 600rwhp cobra trap?
  20. R

    Mach 1 Stock Mach 1 Vs stock LS1

    What is? The cobra? What does that have to do with anything? The guy was saying his lightly modded N/A cobra runs with a blown LS1. A Pullied cobra would waste a N/A cobra, and a blown LS1 would murder a N/A cobra.
Top Bottom
Back
Forums
Menu