Search results

  1. ProKiller

    Progress Thread 94 Vert Ressurection

    looking good so far. as far as suggestions for power, you need to tell us what you want first. if your looking for just a mild H/C/I, then get a trickflow top end kit and call it done, but if you want to go big power then budget is a concern. let us know what your after then we can help.
  2. ProKiller

    What Would It Take For 800 Horsies

    this right here. i think swapping out the heads and getting a larger blower will get you there if not really darn close. I think ultimately you could do it with just boosting it to all hell, but the heads will make it easier.
  3. ProKiller

    Build Thread "Rising from Ashes" 94 Cobra build thread

    that lighting really makes the car look orange. maybe it's just the angle, but it looks like the back should come down a hair more to match the front.
  4. ProKiller

    Proper Way To Part Out?

    agree with corral and sn95forums and sn95source. good place to post up the list.
  5. ProKiller

    Build Thread "Rising from Ashes" 94 Cobra build thread

    looking good so far. nice choice of suspension parts to get it handling pretty solid. thoughts on a 99-01 cobra bumper? those are the best looking bumpers for the mach 1s
  6. ProKiller

    She's Gone...

    sucks but at least you moved in the right direction. although the best plan would have been to gut the shelby and put it all into the 95....
  7. ProKiller

    16x8 With +15 Offset?

    those are really small wheels. it shouldn't look too sunken in with +15mm. i would say a 245/55 would probably be your best fit in there.
  8. ProKiller

    Engine Making Sure I'm Not Missing Anything

    kind of a loaded question since there is always tons of stuff you CAN do, but not necessarily have to. you could replace your rear main seal and oil pan gasket since the engine is out. they are common leak points. what rockers are you going to use? make sure you have a power steering pulley...
  9. ProKiller

    Build Thread "Rising from Ashes" 94 Cobra build thread

    i think i see some kidk9 calipers/sway bar in that first picture
  10. ProKiller

    Wire tuck...advice, tips, possible write ups?

    just label everything as your pulling if off. especially if you're re-doing the wire loom. otherwise, just start tearing into it.
  11. ProKiller

    Pusher fan for radiator

    an aluminum rad is going to work better than additional fans. and as stated, the stock gauge isn't worth a china's sweatshop salary. get a better way to measure before saying the engine is overheating. most of us are still using the stock fan without problems.
  12. ProKiller

    TMI Upholstery for 94 GT Vert

    i think Jared@TMI lurks around these parts, he'll probably come in a set the story straight.
  13. ProKiller

    Back at it again

    looking awesome rich! are those last two pics a fan shroud?
  14. ProKiller

    I think i may have been burned. Help!

    1. like venom said, doesn't mean the TOB is new, but make sure it is adjusted properly. invest in a quadrant/ FWA / cable first off. 2. start with a regular tune up stuff. who knows when it was last done. clean out the maf, plugs, wires, fluids, etc. 3. cheap and good seldom go hand in hand...
  15. ProKiller

    Buying a 95 Cobra what to look for

    my thoughts are it's not worth paying any premium for a 94-95 cobra since your not getting anything that won't be changed out later for more power. the only exterior difference is the front bumper and spoiler. if you want to play with a 4.6 again, a cobra is a good choice. they can be made...
  16. ProKiller

    Check out this time capsule

    i guess that's cool....personally the first thing i would do would be drive it home and beat the living hell out of it. that car was meant to be a trackbitch, not a garage queen.
  17. ProKiller

    Buying a 95 Cobra what to look for

    nothing special being a cobra. check the usual 5.0 areas. the rubber on the harmonic balancer is a common one for example.
  18. ProKiller

    I need to stop having car-related conversations with non-car people.

    my wife doesn't like fox bodies because they remind her too much of her old escort....
  19. ProKiller

    fr500 rims on a stock 95

    they fit fine. i have 18x9 w/ 265/35 on the front and 18x10 w/ 305/35's on the back. lowered about an inch. I had mickey thompson's on the back and they fit without any issues. the nitto nt555r's that i have on there now wouldn't fit without the quad shocks being removed. once they were...
  20. ProKiller

    Build Thread "Rising from Ashes" 94 Cobra build thread

    why not get bullitt side scoops?
Top Bottom
Back
Forums
Menu