Search results

  1. ProKiller

    Removing Oxygen Sensor Questions

    i used to use a long extension and a swivel on the socket. sucked but worked without taking the o2 out.
  2. ProKiller

    Post Your Newest Stang Pic, 94-95 Cars Only.

    that is very clean. don't see too many stock black cars that nice.
  3. ProKiller

    What Strut Tower Brace

    my bbk fits around my performer intake with a 1" spacer.
  4. ProKiller

    Taking Car For Dyno Tune On 8/4.

    very good numbers even without the meth working. you surpassed your goals and then some.
  5. ProKiller

    Engine Intake And Throttle Body Questions

    best thing would be to open up that intake to 70mm. it's best to keep all three the same size. would it kill you to just bolt up the 70mm T/B & elbow? no, but you will be necking down the air which will cause some HP lose. we're not talking anything noticeable from the seat-o-pants dyno...
  6. ProKiller

    Forced Induction Difficult Vortech Fit In My 94

    looking at your pictures again, that blower looks like a fox a-trim. that might impact how it's mounted. did you have to put different accessory bracket on the driver's side to line up the belt?
  7. ProKiller

    Forced Induction Difficult Vortech Fit In My 94

    the rubber elbow comes with the power pipe.
  8. ProKiller

    Forced Induction Difficult Vortech Fit In My 94

    it's not going to be the same with a 351w block as my 302 since it has a higher deck height. it should still work though with minimal modification if any.
  9. ProKiller

    Forced Induction Difficult Vortech Fit In My 94

    the one i have is for a 94-95 and it does put it low in the fender. it does not impact the wheel liner. as far as the hole, i just drilled some pilot holes and then some metal shears. I put some vacuum hose on the bottom so it didn't scratch the power pipe and some small wire loom around the...
  10. ProKiller

    Forced Induction Difficult Vortech Fit In My 94

    the power pipes do fit, you just have to cut into the fender. otherwise check superchargersonline.com for the stock vortech bendy hose.
  11. ProKiller

    Buying A 95 Gts Tonight (i Hope).

    that does blow but i'd wait for the whole story.
  12. ProKiller

    Lets Talk Gear Ratio

    don't fear the gear. go 3.73s
  13. ProKiller

    Forced Induction Difficult Vortech Fit In My 94

    first off this is a fox vortech setup. and what exactly is the problem?
  14. ProKiller

    Anyone 94-95 Guys With A 3" Svo Hood?

    i don't have a pic of that hood particularly but i can tell you it won't be any higher than your wiper blades are now. that's pretty much the industry standard when it comes to hood high in the field of view. i don't even notice my cervini cobra R hood (which is a 3.5") anymore. and please...
  15. ProKiller

    Buying A 95 Gts Tonight (i Hope).

    looks pretty good for being a stock daily driver.
  16. ProKiller

    Input Requested: '13 Boss 302 Ls Or Gt500 Vert?

    congrats on the deal!!
  17. ProKiller

    Official Adam95gt Pictorial Progress of Swap / Clean Up

    uh oh....so we can expect him to be the creator of umbrella corporation?
  18. ProKiller

    Finally Got Another Stang! 95 Gt

    sounds like a good starting point. 300hp can be reached with a H/C/I install. look at the trick flow setup. as far as the suspension, it's really no different then all the other stangs you've owned. all the same except for slight variations in axle length.
  19. ProKiller

    Brakes Replaced Brakes Now The Front Are Locking Up Can Someone Help Me

    did you make sure the slides weren't rusted and were free?
  20. ProKiller

    Fixed A Major Problem Today..........thoughts On This One Slight Issue

    you're sure its arching from the wire and not the plug? could have cracked the porcelain a little bit and it will arch from there. the longer header bolt should help but if it's stripped the only way to really fix it is to have it helicoiled. i would also recommend to test the longer bolt on...
Top Bottom
Back
Forums
Menu