Search results

  1. 8

    finished 5 lug conversion few ???

    one from a 94-95
  2. 8

    finished 5 lug conversion few ???

    oh i must add how much your site helped this project come true. also i have been fighting rubing on the drivers rear. im using the northracecar braket. i had to use washers as spacers for the braket to get it centerd but only on one side. and i still hear the rotor rubing somthing...
  3. 8

    finished 5 lug conversion few ???

    should i hook the a vac gauge one the line going into the booster? i do hear a vaccume leak when runing therse a slight wine and when i turn it off i hear it wush out of it like realiving the pressure. thanks for the help keep it comin :)
  4. 8

    finished 5 lug conversion few ???

    alright i did the 5 lug with cobra brakes and a suposed 94-95 booster mc my peddle is really hard and the brakes arnt all that much better than stock what could be going on here? ill post some pics tomarow after i take some of the finished shots i got all the pics from the prosses.
  5. 8

    Looking for best slick for timed rally racing.

    sounds fun, what kind of surface is it going to be tthat nascar tires is only gona work really really good if it gets hot and the surface doesnt have rocks and gravel on it
  6. 8

    clunk in trans.

    manual
  7. 8

    clunk in trans.

    well latly there has been a clunk sound from the rear of my car. today i put the car up in the air at the shop. i fegured it was the U joints. but when i would turn the driveshaft i would hear this nose in the transmision. what could it be. there is about a 1/4 inch or so play in the driveshaft...
  8. 8

    Boxing Control arms.

    what about boxing the front control arms?
  9. 8

    need some math help, stupid cops

    i defently think that is a good idea about geting it fixed and showing up with the receipt. so thank you all that mentioned that. i knew there was a reason i asked you guys.
  10. 8

    need some math help, stupid cops

    thank you lxboy. you are hit my point on the head. especially if you lived around me, every road within 6 miles of my house is under construction, so the speed limit is 25 EVERYWHERE. no one is gona drive 25 at 11:00 at night when there are 3 cars on the road for a mile. i have fallowed cops...
  11. 8

    need some math help, stupid cops

    i thought i was going like 5 over, i was going so freakin slow before i saw the cop and once i saw him i let up and went as slow as third would alow, i fegured that would be enough i was creapin. there was just construction put up a few nights ago, and i have lived on this road for 5 years...
  12. 8

    need some math help, stupid cops

    it was at 11.15 last night and i was just paceing the car infront of me witch was about 200 feet infront of me.
  13. 8

    need some math help, stupid cops

    thats what my speedo was reading when he was behind me so i fegured i was doing like 32 or so, this construction cones just went up the day before. and i didnt realise it was a 25
  14. 8

    need some math help, stupid cops

    well last ngiht i got my first speeding ticket. what sucks is i dont think i was speeding as bad as he says. so i would like some advice on how to fight it. the only way i think to fight it is with facts and some math. my speedo is off but im not exactly sure how off it is so i really need some...
  15. 8

    *checks watch* Stupid question time

    sounds like your clutch is slipping could be related to the fluid but most likly due to how you adjusted your clutch.
  16. 8

    wont start 3g upgrade

    it might just be a dead battery, im gona go try some of these things right now. it will just do one crank(light up the dash fine then just stop crankinging, then the lights on the dash wont come back on when i atemt to do it again. so i hooked it all up correctly right?
  17. 8

    wont start 3g upgrade

    well tonight i did the 3g upgrade and my car wont start. first off i havnt tryed any trouble shooting sense it was 1:50 when i was done( wow it looks so much better ill post pics tomarow). i put terminals on the black orange wires and hooked them to the post on the alternator along with a...
  18. 8

    Changing Ball Joints and Bushings in Front Arms?

    on the baljoint subject, if you have sn95 spindles is there a diffrent ball joint that can be used so you dont need the .330 spacer? would it be worth boxing in the lower part of the a arm?
  19. 8

    is it missing or what?

    how do you run the ballance test?
  20. 8

    is it missing or what?

    is there a way its like a bad fuel injector?
Top Bottom
Back
Forums
Menu