Search results

  1. Mach1Run

    Mach 1 mach upgrade questions

    Eaton swap is good if you can get all the parts cheap, otherwise you'll spend as much on it as you would for a purpose built mach kit. To get around 400 you should be fine with single digit boost and stock internals and a good tune. More than that you'll want to get forged internal bits. As for...
  2. Mach1Run

    Stupid Mistake (X-Pipe)

    I rook he mach to a local exhaust shop and had them put it on the lift and loosen all the bolts for me then hand tighten them enough to get home. They did it for fre and it took more time to get the car on the lift than get the bolts loose.
  3. Mach1Run

    Mach 1 mach upgrade questions

    My mach is currently near 300rwp with less than that. I would say forget the UD pullies, too much risk not enough reward, skip the mass air what you have should be fine, headers get longtubes - though you would have to change midpipes as well, the throttlebody is hit or miss too - I dont think...
  4. Mach1Run

    Lowering / Quick Questions

    Prokit on the front stock Mach rears. Rears are super easy to DIY and front not too bad on a mach. Before After
  5. Mach1Run

    99-04 / 96-98 4V guys: what track times do you run with minimal mods?

    my best so far is a 9 flat in the 1/8th. but I suck since I have only got a about 8 passes in my lifetime lol.
  6. Mach1Run

    04 Cobra engine

    D&D Kit since you'll need a couple of other bits if you swap to a t56.
  7. Mach1Run

    Todays Mustang Rice

    Thats one way to keep from shattering or chipping your fiberglass R bumper cover ....
  8. Mach1Run

    93 LX Vert - Top issues

    For my father's day present the wife found and got me a 93 LX convertible. Needs some time and attention but it runs good and the top doesnt leak. However the top does not work by itself, you have to put it up and down by hand, so that is going to be the first order of business. When you flip...
  9. Mach1Run

    Any differences between new edge GT's?

    stock mach subs are not full length. just 1/2 or 1/3 square tube.
  10. Mach1Run

    Any differences between new edge GT's?

    there is a difference in heads, at least on the machs. some heads take 4 turns to seat the plug. these were the ones prone to blowout. if it has the revised heads its should take about 8.
  11. Mach1Run

    HAS ANYONE DONE THIS????

    I think its the cats making the difference.
  12. Mach1Run

    HAS ANYONE DONE THIS????

    +1 A guy at work did that to his mach then went and put an o/r x on. sounded great at idle but like a dump truck on the gas. Gave him my take offs when I put my bassani ccatback on.
  13. Mach1Run

    Mystic Needs Paint

    dealer unless the guy really knows how to lay mystic down. A buddy put mystic flames on his car (he's a painter and did it himself) and says its not easy to match to existing paint.n Plus its was something like $600 a quart a couple of years ago when he did his, cant imagine its gotten any...
  14. Mach1Run

    o/r h with bassani cat back?

    go with an X with the bassani. sorry i dont have any driving vids but had no one to hold the camera for me at the time. 2v 01 GT with o/r x and catback http://www.youtube.com/watch?v=vJlMUD-uneg 4v mach o/r x and catback http://www.youtube.com/watch?v=14ytnRlJxKY
  15. Mach1Run

    Mach 1 gas mileage and reliability

    17-18mpg city, 21-22mpg mixed, with current mods.
  16. Mach1Run

    Mach 1 Best mods for the $$$?

    4.10s here and still getting 18mpg city. Most sotp change to date. php spacer altered my curve a bit but not anything that would be noticed by itself. A good tune will go a looooong way even with nealy stock machs. I am going round and round with the LT deciscion myself. I want them but am...
  17. Mach1Run

    Mach 1 1 inch shaker riser?

    The php intake spacer bumped my shaker up perfectly imo, about 1/4 inch.
  18. Mach1Run

    bassani bx or magnaflow catback?

    this is the bassani bx or X and catback i had on the GT I used to own. http://www.youtube.com/watch?v=vJlMUD-uneg