Search results

  1. Mach1Run

    reverse in a T-56 (viper-spec)

    I normally put it in 6th then go from there to R. Doesnt always feel like its completely in R if I try to go straight from N most of the time.
  2. Mach1Run

    reverse in a T-56 (viper-spec)

    Mine is wired to the brake and still needs a bit of muscle to get into R, though it has gotten better with use.
  3. Mach1Run

    New Supercharger

    Unless you get one hell of a deal on the parts its far simpler to get a mach specific kit. M1R has a thread with all the parts needed to use as a checklist.
  4. Mach1Run

    Lowering the mach's nose.

    Then maybe I misunderstand how they work. The springs are just step one to getting there. I thought a higher rate in the front would help pick the weight off the front during launches and a lower or progressive rate in the back would make it easier to push the tail down at launch. I was thinking...
  5. Mach1Run

    Lowering the mach's nose.

    A while back I was considering lowering my car with either the eibach sports or HR super sports. Then I got to thinking about my what I really wanted out of the car as a whole and how I do not want to do any mods more than once if I can help it. Ultimately I think I will wind up going longtubes...
  6. Mach1Run

    another accident thread :(

    Bet they fix it if the frame is ok.
  7. Mach1Run

    Help, Can't take off stock H-pipe

    If the pipe is off the car go get the o2 socket from a parts store. If its not off yet, unclip the o2s from the harness, drop the pipe out, then go get the 02 socket. Right tools will make it soooo much easier. :D
  8. Mach1Run

    americanmuscle.com WHEELS HELP!

    ordered a set of chrome fr500s and got them in less than a week with no problems.
  9. Mach1Run

    do all cats pass emissions

    Every catted X I have tried still tripped the MIL. If you plan on doing anything in the future mod wise like gears, shift points, etc., get a tuner and turn them off. No visual here where I live and as long as I dont have a MIL on or p1000 then the Mach passes with an O/R X.
  10. Mach1Run

    need pics of 17" fr500 on 99-04...

    chrome silver
  11. Mach1Run

    honeycomb trim panel

    Tried the vinyl and its not worth it. Paint it.
  12. Mach1Run

    Connecticut DMV?

    Looks like it got caught when they were auditing the testing data. You have the rear 02s programmed off with a handheld tuner?
  13. Mach1Run

    Mach 1 Alarm?

    To my knowledge they didnt come with a alarm from the factory. Just a fob with lock / unlock / trunk / panic buttons.
  14. Mach1Run

    Mach 1 How much power?

    Ditch the pullies. Risk not worth the reward. Check the registry for the rest of the stuff.
  15. Mach1Run

    Mach 1 Post Pics of your Mach

  16. Mach1Run

    Good shop in Dallas or Waco

    +1 for gearheads.
  17. Mach1Run

    Cobra rockers on a GT

  18. Mach1Run

    Used mach 1 suspension

    They ought to be fine, i got nearly 36k on my stock ones so far with no issues.
  19. Mach1Run

    Mach 1 15"s on a mach????

    Try the wheels section of Mach1registry.com. I cant remember for sure but I think alot of guys go to GT calipers and/or do a little grinding to get the smaller wheels to work up front.
  20. Mach1Run

    NEW SPONSOR!! Sequential Tail Light Kits Now Available

    does your kit require you to cut and splice or is it plug and play?
Top Bottom
Back
Forums
Menu