Search results

  1. S

    Check Engine Light

    I drop the codes and got 5 DTC's: 1) P0171 - Bank 1 too lean, 2) P0174 - Bank 2 too lean, 3) P1400 - Differential pressure feedback. EGR circuit low input, 4) P1405 - Differential pressure feedback sensor, Up stream hose off or plugged. 5) P1407 - Exhaust gas recirculation, no flow...
  2. S

    Installation of cam sensor and synchronizer assembly

    I'm installing the camshaft on a '95 3.8L, but lost TDC (on the compression stroke). I'm trying to avoid being 180* out when finished. If someone knows the answer to the following question, I'll appreciate your help. With the #1 cyl. at TDC on the compression stroke, and with the dot on the...
  3. S

    Performance/Street Cams

    Has anyone found and/or runs a performance cam in a 3.8L ('95 LX) on the street? If they are out there, I haven't been able to find out anything about them or their performance. Any comments will be helpful.
  4. S

    Rear ABS Sensor

    I'm trying to R&R the rear bearings and seals. I need to remove the rear ABS senors to get enought slack to remove the C-lock on the inner end of the axle shafts in the differential. Then I can pull the axles and get to the bearings and seals. I removed the "E" type bolt holding the sensor...
  5. S

    Rear Bearings and Seals

    I'm trying to pull the axles to R&R the bearings and seals. I can't get the C-lock on the inner axle shafts to clear the differential gear with the axles pushed inward. I might get enough slack, if I can remove the rear ABS sensors. I removed the "E" type bolt, but the sensors won't budge...
Top Bottom
Back
Forums
Menu