Search results

  1. R.J.

    keep loosing coolant at radiator cap area.

    bad cap or cracked reservoir.
  2. R.J.

    What now?

    +2 4:10 gears
  3. R.J.

    Rear Sway Bar " J " Clips

    PM sent
  4. R.J.

    Idle Air Control question...

    Thanks, I'm glad I could help
  5. R.J.

    Valve covers to fit 95 GT?

    different upper intake clearences
  6. R.J.

    Where to Find a Clock Spring

    PM sent
  7. R.J.

    Valve covers to fit 95 GT?

    andersonfrodmotorsport.com chrome semi-tall, direct fit and only $80
  8. R.J.

    Idle Air Control question...

    PM sent
  9. R.J.

    Are pro. products THrottle bodies decent?

    My PP throttle body worked great on my SN95. My local tuner (Karls East Coast Speed) actually recommends PP or Accufab. I usually listen to them because they hold claim to the worlds fastest and quickest 6 speed 07 Shelby Cobra!
  10. R.J.

    name three things that would?

    Metal EVAP line fell out of its clip above the drive shaft? (happened to me)
  11. R.J.

    Gear pattern question

    Those marks seem a little to far to the inside, I would add shims. Also your backlash range is .008-.015 and yes 9is is best due to heat expansion. Also you carrier side to side lash should be 0.00 and you pinion pre-load should be 8-14inlbs for used bearings and 16-29inlbs for new bearings...
  12. R.J.

    MM UCA bushing tool review

    Great tool!!!! Very well designed!!! Works as advertised!!! I was worried (living in New England) that the bushings were going to be permanently rusted in place. I anti-seized the tool as stated in the directions and it worked perfectly. The bushing came out with ease. They popped initially as...
  13. R.J.

    MM UCA bushing tool review

    Great tool!!!! Very well designed!!! Works as advertised!!! I was worried (living in New England) that the bushings were going to be permanently rusted in place. I anti-seized the tool as stated in the directions and it worked perfectly. The bushing came out with ease. They popped initially as...
  14. R.J.

    suspension upgrades?

    +1 for the bullitt kit because you can get it really cheap. PM sent
  15. R.J.

    Walbro 255lph still a good choice?

    Try Treperformance.com they have a 255 for $70 that they directly compare to Walbro and they have a 1 year warranty on theirs.
  16. R.J.

    O2 sensors causing surging idle

    Buy a Haynes manual and check the O2's with the procedure is chapter 6. With basic tools, there is a way to test almost all of the sensors on the car. You should clean and check your MAF and IAT also. Haynes chapter 6 has great info in it.
  17. R.J.

    BBK adjustable FPR leak

    Great decision, the Kirban is a nice piece.
  18. R.J.

    adjustable clutch cable

    +1 STAY WITH THE STOCK CABLE!!!!!!
  19. R.J.

    new clutch making noise-NEED HELP

    Yes the throughout bearing should have been done when the clutch was done, it comes in the clutch kit. Oceanside CA, Camp Pendleton I am a UH-1N Huey and AH-1W Super Cobra Mechanic.
  20. R.J.

    new clutch making noise-NEED HELP

    Slowstang96: That noise is either a bad throughout bearing or an improperly adjusted clutch cable.
Top Bottom
Back
Forums
Menu