Search results

  1. R

    Fuel Pump Fuse Blows

    Don't put a larger fuse than what the circuit calls for. The wire is only rated to handle that current. Any larger fuse can cause a fire. If the fuse blows as soon as you turn the key you could have a short some were.
  2. R

    Belt Slip! Help!

    I am sure the the boost gauge is correctly. I think to do not have a vacuum leak. If i did I think I would get a CEL and the car would run like crap, which it is not. I am getting a lot of belt dust and when I shift the hard it falls on its face. I am going to try a smaller belt. If it is not...
  3. R

    Belt Slip! Help!

    I believe that 99 and 02 have two different belt configurations. That is why your belt is so much smaller. I think I am going to try a 112" belt to see if that helps.
  4. R

    Belt Slip! Help!

    Anyone!:shrug:
  5. R

    Belt Slip! Help!

    I got my car dynoed. The numbers were low (373rwhp 365rwtq) for my setup. (see signature) The car was only pulling 6# of boost at 6,000 rpm with a 3.25" pulley. I think that the belt is slipping bad. Alot of belt dust. I am running 113" Gaterback, but that is the size vortech recomends with a...
  6. R

    Roush Saleen PowerFlash tune for diablo tuner

    DO NOT drive your car with 19# injectors and a roots style blower! The boost will come on instantly and you will blow up your motor tune or no tune. You can get away with this with a cintrificall blower but not a roots type.
  7. R

    Weapon X COPs

    Maybe if you were not so cheap you would have bought a better COP and you would make more horsepower!
  8. R

    100LL Aviation Gas?

    I am going to have two tunes pump gas tune (93 octane) and a race gas tune (100 octane)
  9. R

    100LL Aviation Gas?

    No the car is not a daily driver. I put on less 5000 miles a year. i would use a 50/50 mix with 93.
  10. R

    100LL Aviation Gas?

    Yeah I thought so, I was wondering because it is half the price of Sunoco 260GT.
  11. R

    100LL Aviation Gas?

    Has any one used 100LL Avation Gas. I know the LL stands for Low lead. Would this hurt the 02 sensors or Valve seats? I have no cats so I am not worried about them. Thanks for the help!
  12. R

    Dyno results with new Vortech

    This guy cant even change his own oil! He takes it to jiffy lube! HaHa what a J/O!:rlaugh:
  13. R

    Supercharger.. black/gray smoke when floored.

    How much Boost are you running?
  14. R

    Dyno results with new Vortech

    This guys set up blows:notnice: My lawn mower pulls more horsepower then him. Dont listen to him, what a J/O!:Track:
  15. R

    Prochamber Install..help me here please

    I took the studs out of the manifold. The nut would bottom out on the stud before the the prochamber would properly seal on the manifold. So I used bolts with lock washers and bolted the prochamber to the manifold. The studs are not to bad to get out, use some PB buster and Vice grips. You will...
  16. R

    Dyno results with new Vortech

    It looks like you are starting to run out of fuel on your top end. Do you know what your fuel pump and injector duty cycle is? What fuel pump are you running?
  17. R

    Oil Temp too High?

    Thanks for your Help!
  18. R

    Oil Temp too High?

    I installed the wideband Air/fuel Gauge. I took it for a quick ride again, when I drove it the a/f was between 14 to 15. That was was pulling vacume all the time and shifting before 3000. The oil temp is saying right around 245. So I think that I should be ok to drive it to my tuner. I am still...
  19. R

    Wastegate on supercharger?

    I believe they had a articial about this in Muscle Mustangs and Fast Fords. They did say the the power band was alot like a turbo. They said it was alot easier to dial up the boost when changing between pump gas and race gas. No pulley swap! It is a great idea!
  20. R

    Oil Temp too High?

    I have a Autometer Wideband Gauge that I am going to put in tomorrow to see how thing are doing. JLP is about 30 min from me. It should be ok getting there. I will keep you up to date how I make out. thanks for the help.
Top Bottom
Back
Forums
Menu