Search results

  1. NOSNotch

    Water in the floorboard. Pic of possible problem:

    the heater core is in the box behind the passenger side of the dash. without going out to look at my car i would say just left of the glovebox and up top by the windshield
  2. NOSNotch

    Water in the floorboard. Pic of possible problem:

    not really with it in the car b/c it would be impossible to see it leaking. maybe try having a friend run a hose around the windshield seal while your in the car looking for any water coming in. if it stays dry i would say heater core most definitely. its not that bad to do, i think theres a...
  3. NOSNotch

    Changing rear springs...

    not bad at all if you have some mechanical ability. undo the upper shock nuts with a jack under the center of the rear. if you lower the jack you should be able to get the springs out otherwise you might have to undo the bolt for the lower control arm.
  4. NOSNotch

    Water in the floorboard. Pic of possible problem:

    it looks normal. the seal looks ratty but they all get like that. i saw the switch on your accumulator unplugged but does your ac work?
  5. NOSNotch

    3.73 or 4.10

    before you change the gears do you have any suspension work? upper/lower control arms? running on street tires, drag radials or slicks? what kinda 60' were you pullin before
  6. NOSNotch

    Can 5-6psi of supercharger damage 10:1 engine?

    a buddy of mine was running low boost on a 10:1 car without problems for a little bit. He did end up switching to a thicker head gasket to lower compression though. They say the tune is key to avoid problems with boost. good luck with it
  7. NOSNotch

    Water in the floorboard. Pic of possible problem:

    the thing in your pics is the heater box drain. usually water wont come in the car around that seal. it could be the windshield seal if whoever did the job didnt know what they were doing. it could also be the heater core even though your not smelling antifreeze and the rain could just be...
  8. NOSNotch

    removing side moldings

    thats what i was thinking. so if i remove the door molding, the molding right under where the 5.0 badge would be and the molding right behind the door i shouldnt have to do any filling?
  9. NOSNotch

    removing side moldings

    My cars hopefully going to paint within a few weeks and i'm pretty sure im going to pull the moldings from the door, back of fender, front of quarter. just wondering if anyone has any pics with them off and are there holes underneath any of them? thanks kevin
  10. NOSNotch

    some advice on cleanin up this intake. . .

    just picked up a Systemax and accufab throttle body/egr spacer off a guy. I think the intake was sitting on the car for a little while and I want to try to clean it up before i put it on my car. Just wondering if anyone has good suggestions on what works? thanks
  11. NOSNotch

    Please recommend a good balancer

    my buddy just picked up a ford racing balancer from jegs. its' 28 oz but it says the weight is removable. cost about $250 i think and looks pretty nice
  12. NOSNotch

    e-brake support bracket broke

    i've seen it happen on a few different cars, only solution i've ever known was to clean the area and weld the piece to the floor. i cant imagine it costing too much at a decent shop
  13. NOSNotch

    Convert 1/8 to 1/4.... PLEASE

    mid to low 11s ? just a guess
  14. NOSNotch

    What intake/injectors would you go with?

    Im in the middle of gettin together the stuff to convert my car to EFI. Undecided on what intake and injectors i wanna go with and just lookin for some other opinions. The motors just a 306 with 10 1/2 to 1 compression, heavily ported twisted wedges, custom grind nitrous cam, and 1.6 rockers...
  15. NOSNotch

    Couple quick 93 harness questions

    gettin all the stuff together to get my coupe back to efi and i just picked up a 93 harness. theres two things missing i want to take care of before i put it in. First over on the drivers side near the coil there is a black two piece plastic connector that grounds to a bolt. i'm missing the...
  16. NOSNotch

    Question on fuel lines

    i've been tryin to gather up some parts to convert my car over to efi from carb. I just got a set of stock fuel lines off a buddy of mine. the only problem with them is up towards the front where the two metal lines that go to the rails clip in. the black plastic type lines are cracked. a buddy...
  17. NOSNotch

    quick advice on tach wiring

    its an autometer light and tach. ive searched around for an answer and havent found anything yet. i've got another one at the shop i think im gonna try. if that doesnt work just gonna tell my buddy to return it. thanks for the advice guys
  18. NOSNotch

    quick advice on tach wiring

    other than the shift light the tach works fine. reads correct and the illumination light works, just the shift lite is the problem. any other suggestions? im leanin away from a tach adapter just b/c two of my friends have this problem both with 5.0 cars and mine is hooked up the same way w/o...
  19. NOSNotch

    quick advice on tach wiring

    whats up guys. my buddys havin a problem with his tach. i checked all his wiring today and it seems to be wired up right. red on switched 12v, black is grounded, white going to light switch hookup and green is going to tach output on msd box. when he turns the power on the shift light lights up...
  20. NOSNotch

    I saw this really bright notch while I was on vacation

    like already posted the pics def not a chop. i also saw the car in OC during car show weekend. we saw the car coming in traffic pretty far down the road. the pics really dont do the car justice its BRIGHT. i have a couple regular pics of it, just gotta get em online as for mods, dont think he...
Top Bottom
Back
Forums
Menu