Search results

  1. CobraM23

    96-04 Trick Flow Track Heat Intake Manifold

    SOLD!!!
  2. CobraM23

    96-04 Trick Flow Track Heat Intake Manifold

    This manifold was on my car for approximately 5k miles. It is the single 75mm TB opening version. I took it off and went with the Edelbrock Victor Jr. because I needed more room in front of the motor to mount my 76mm turbo. The reverse orientation of the alternator the manifold requires will...
  3. CobraM23

    Went To The Track Tonight!

    He probably doesnt have his shift points recalibrated. On stock tune, max upshift rpms is 5500. Mine would shift into O/D about 100' before the 1/4 line back when it was stock. Now with a tune and the shift points elevated, im like you guys and can tach almost 120 in 3rd before hitting O/D
  4. CobraM23

    96-98 Roll Call

    The car is an automatic so assuming an 18% drivetrain loss that puts me right around 340 at the flywheel which I think is pretty acceptable. If anything its probably the tune is a tad too conservative.
  5. CobraM23

    96-98 Roll Call

    My best time so far is 12.86 @ 105.4 w/ a 1.879 60' on street tires at MIR. I have yet to run it on the big & littles and probably wont go back to the track until I have the stall converter put in.
  6. CobraM23

    96-98 Roll Call

    My baby with my dads Stang: Mods: 138k Stock shortblock, PI Heads/Intake, VT Stg II cams, JLT RAI, Accufab 75mm TB, C&L plenum, Steeda U/D pulleys, Hooker Longtubes & offroad X, Magnapak catback, EGR delete, MSD plug wires & coilpacks, SCT custom dynotune, 4:10, 31 spline axles & diff, PA...
  7. CobraM23

    few new KB 2.6 pics

    I love your car man.
  8. CobraM23

    3600 stall is in!!!!!!!!!!

    Ive got a tubular K, fox body 4 cyl springs, and 90/10 struts with no sway bar up front. In the back I have cut stock rears with tokico hp shocks. Ive pulled a 1.87 on street tires so I think my suspension will be ok, maybe a little too soft in the rear if anything. Ill let you know.:nice:
  9. CobraM23

    3600 stall is in!!!!!!!!!!

    Congrats man! I just ordered a 3800 stall from Alan today. I cant wait to get it put in and see how big of an improvement it will make for my car.
  10. CobraM23

    Happy B-Day to me + UPS + Pics

    Ive had mine for over a year now and when left in D its exactly the same. When manually shifting the trans, it feels alot more positive with this shifter vs. the stocker. With the stocker, it clicks into place whereas the Hammer feels like it locks into place.
  11. CobraM23

    Happy B-Day to me + UPS + Pics

    None whatsoever my friend.:nice:
  12. CobraM23

    official 4.6 liter Mustang photo thread

    Couple new ones
  13. CobraM23

    After market Hood 96-98

    I have an 00R hood from cervini's. I like it because its different.
  14. CobraM23

    The Mach 1 needs tint...Suggestions needed!!!

    I was scared of going too dark but I went ahead and got 5% all around. I love it! Backing up at night kinda sucks but roll down the windows and its fine.
  15. CobraM23

    Lowered '96-'98s

    Foxbody 4 cyl front springs cut 1/2 coil, cut stock rear springs, tokico hp shocks/struts
  16. CobraM23

    DONT ORDER FROM RPM OUTLET

    I called them once to order something because their ad in MM&FF said they sold the C&L plenum/Accufab 75mm TB combo for 299. I thought no way its that cheap so I called to confirm. I got some girl on the phone who didnt even sound like she had a clue. She kept telling me to check their...
  17. CobraM23

    pi heads conversion + which cams

    VT stage II NA cams here. No PTV problems either.
  18. CobraM23

    Installing Steeda Underdrive Pulleys for Beginners

    A lot of unnecessary steps but overall a decent write up. I'd probably recommend letting the sealant cure overnight before starting the car up too. I didnt and had a small leak and had to reseal it again.
  19. CobraM23

    official 4.6 liter Mustang photo thread

    Recent ones. Windows tinted.
  20. CobraM23

    Post Your Newest Stang Pic, 94-95 Cars Only.

    Smoked Headlights
Top Bottom
Back
Forums
Menu