Search results

  1. BigDaddyCee

    6 cyl 200 to a 302...possible?

    Go for it there are lots of guys that have done it on here including me. So you have a good pool of mentors to help you. Some guys say it costs too much but if your careful, you can do it very economically. Just make sure the suspension is up to v-8 standards for safety reasons. Have fun...
  2. BigDaddyCee

    Clutch Troubleshooting

    Firstly, I would check your tranny to bellhousing bolts aswell as your bellhousing to engine bolts to ensure they are tight. If there is play here when you push on the clutch pedal it could be separating and cause your clutch to be misaligned. Another possible cause could be the bearing...
  3. BigDaddyCee

    Rust Repair

    Main thing to remember here that the act of rusting is a chemical process, and to reverse it you must use chemicals. Remember safety first, use good gloves and face/eye/lung protection. Just because you have sanded the rust away and it looks gone it will come back if not treated properly...
  4. BigDaddyCee

    Export Brace/Monte Carlo bar - opinions

    I definatly noticed an improvement in handling when I added my monte carlo bar. If you are adding a big high horsepower/torque engine then any body/chassis stiffening is advisable. Otherwise you may encounter body twist and stress cracks may develop in the car. I would also consider sub frame...
  5. BigDaddyCee

    Engine/tranny troubleshooting...

    I had a buddy who had a 1978 ford truck/standard tranny with a similar issue. He had a tooth missing on his flywheel, when ever the starter landed on that tooth we had to get out and nudge the truck forward to move it to the next tooth so the starter could grab. Then it would start and we...
  6. BigDaddyCee

    painting interior trim

    I would try spraying it with adhesion promoter first then using your paint of choice . I have used it on my 88 GT Mustang, in particular all the polyurethane(plastic) bumper and trim parts. It has been acouple of years now and no problems. You can pick it up at any body shop supply store. It...
  7. BigDaddyCee

    Toomcinator-Lucas Tranny conditioner?

    Hey Tooncis, Good too see you are still posting. I haven't been around for awhile Been busy the last year :cheers: . But now that winter has hit hard up here I will be spending more time on stangnet! See you around. :canflag:
  8. BigDaddyCee

    65 mustang, front coil spring cover

    Would I do it? Not likely. Structural integrity comes to mind. If you were to remove this piece I think down the road you might find some cracks in your shock tower or on your inner fenders. Also that is the piece that your rubber bumpstop mounts to. I personally would not sacrifice the...
  9. BigDaddyCee

    some more problems

    I remember a few years ago I had problems with my turn signals and the internal parts had to be replaced. They are plastic or nylon and have been known to break. Mine had a broken piece and had to be replaced. I recall having to remove all the wires/pins from the connector and sliding the...
  10. BigDaddyCee

    Found A Lincoln Versailles Parts Car

    :nice: Personally I'm not interested in your parts, but I have to agree that there is no place I would rather shop than at the local wreckers. You just never know what you will come across. Every day is different. Good find and happy hunting. :canflag:
View older results
Top Bottom
Back
Forums
Menu