Search results

  1. WhiteDevil69

    Which cams for 4.6l SOHC?

    Its all in the tune, your milage wont really be affected unless you a leadfoot, well, then it would be crap anyways. Usually your gonna see around 35rwhp from good set of N/A cams, 50 would be at the very end of your rpms, which is great because you can then shift at 6k instead of 5500 :bang...
  2. WhiteDevil69

    Would like to have computer re-flashed

    I'd just call your local ford dealers and get an estimate, I have no clue. That or get an aftermarket chip and have it set to use pump gas like most are.. :flag:
  3. WhiteDevil69

    new best ET. now what's next?

    I'm about to install teh BBK's this weekend. I will let you know what I think about them on Sunday. I will be starting a new thread then about them, so make sure to check the new threads on sun or monday mornin before you buy them. So far from the looks and from the header gaskets that they...
  4. WhiteDevil69

    2v to 4v head swaps

    Not really worth the $$ to be honest. I was thinking the same thing a long time ago but the more I read into it, the more I was advised against it. No real need to be honest, would be cheaper to get a blower and be done with it. Just gotta know how much power you wanna make.
  5. WhiteDevil69

    Do it yourself they say...pff

    It was my car we were working on, and like he said, it just takes long because its the first time your trying, patience is a virtue. Though I always get frustrated on the long jobs, and they all take longer than all you seem to post, it gets done and thats what matters. Also, from the jobs we...
  6. WhiteDevil69

    What about Cost for forged internals?

    Good deal, they are the best of the best in all aspects. You will get a 100% insanely positive response from ANYONE on this site that has been here for more than a few months if you ask about MFP. Post up when you make up your mind on something and keep us up to date as you get stuff done. :nice:
  7. WhiteDevil69

    What's the difference between blower cams and n/a cams?

    Exactly, a N/A cam is not going to be a "bad" part to have if you do get the blower down the road, it just will not make as much power as a "blower" cam would.
  8. WhiteDevil69

    13 sec 96 GT?

    you can never be embarrased by a zo6 though... friggin thing is a beast, of course your gonna get worked.
  9. WhiteDevil69

    13 sec 96 GT?

    suspension, suspension, suspension. 10000 rwhp wont get you 13's if you spin your tires all day. 200 rwhp will get you well into the 13's with the right suspension setup. I'd get the PI heads/intake, exhaust of your choice, and skip the rest for suspension work. :flag:
  10. WhiteDevil69

    FRPP shorty headers. How?

    Good luck man, I am in the same boat with my BBK's, putting them in sunday in my garage with 2 jack stands and a floor jack... :bang: Anyways, sure you will do fine, but I am pretty sure you will need to jack up the engine at least a few inches, which really isn't that big of a deal. Follow a...
  11. WhiteDevil69

    What about Cost for forged internals?

    I'd go to www.modularfordpowerhouse.com for them if you still decide to. Think it is cheaper there. I've seen kits on ebay going for 1800 and what not, really depends on the brand. If you call tim over there at MFPH.com he will get you on the right track. :nice: good luck :flag:
  12. WhiteDevil69

    Bassani Headers Install

    good deal, I will for sure then, just to make it easier even if it is possible without. Now for the gaskets they came with... First off they were all warped and bent when i got them. on one there is a little crease where it was bent, didn't crack it or anything, but there is that noticable...
  13. WhiteDevil69

    Bassani Headers Install

    Sorry to jack the thread but what about with the BBK Tuned Length Shorties? Think its worth taking the springs out and all those extras steps as well?? The only reason I would really rather not is, I just got through putting them in this last weekend.. :bang: I thought Shorties should be...
  14. WhiteDevil69

    Shortie header.

    They are in stock, I ordered them and recieved them 3 days later.. Look decent so far, little unsatisfied with the replacement header gaskets so I will probly reuse my stockers... :notnice: Anyways, I will let you guys know how they feel sunday night after I get them on. :rolleyes:
  15. WhiteDevil69

    simple question about vortech

    Not much you can do to be sure, my advice would be to have them throw it up on ebay with the buy it now price set to what you guys decide. Thats what I did for a few items I have bought. This way Ebay can fight it if they send you a defective part. It will cost them a little percentage, I...
  16. WhiteDevil69

    Weird Smell...

    Bullit - You gained only 11 rwhp from full exhaust, T/A, U/D pulleys, and all that? :shrug:
  17. WhiteDevil69

    Weird Smell...

    Good luck with that, I wouldn't be too worried though, cuz my problem has been with me since day one, the stupid things keep coming loose. But I am switching out the bolts when I put in the headers this weekend. It has been a slow process and hasn't changed since the first week, kinda carved a...
  18. WhiteDevil69

    Weird Smell...

    My magnaflow catback has melted a good half inch into each side of my gas tank :nonono: is everything adjusted right on your exhaust? I'd probly jack er up one of these days and take a look just to be safe. But hopefully someone knows something that I dont. :flag:
  19. WhiteDevil69

    SOLD Mustang. Have winter wheels/tires used only one season.

    Theres a pretty little tab up top that says "Trader" this belongs over there. :spot:
  20. WhiteDevil69

    Best exhaust set up for our cars?

    Another vote for Magnaflow. I've heard everything except SLP in person on a 4.6 and personally, magnaflow catback with your personally perfered x/h pipe will give you an awesome sound. If I had to do it again, I would try an H-pipe, only heard 2 of these in person and enjoyed the deeper, less...
Top Bottom
Back
Forums
Menu